# DiMarzio DiMarzio EP1201PP 500 kΩ push-pull Canonical page: https://guitarwiring.app/catalog/dimarzio-ep1201pp-500k-push-pull Named on DiMarzio's official 4-conductor instructions as the 500 k push-pull (EP1200PP is the 250 k sibling). DPDT switch in the pot, suitable for Dual Sound, phase, or coil-split without drilling extra holes. Category: [Potentiometers]() Manufacturer: [DiMarzio]() Type: Audio ## Specifications - Resistance Ohm: 500000 Ω - Taper: Custom audio - Is No Load: No - Is Blend: No - Shaft Kind: Split knurled - Body Diameter Mm: 24 mm - Switch Kind: Push pull dpdt - Casing Is Ground: Yes ## Terminals - lug1: Lug 1 (CCW end); role: Lug ccw; lead colour: not specified. - lug2: Lug 2 (wiper); role: Lug wiper; lead colour: not specified. - lug3: Lug 3 (CW end); role: Lug cw; lead colour: not specified. - can: Can (casing); role: Casing; lead colour: not specified; ground by default. - sw1: Pole A, up; role: Switch tag; lead colour: not specified. - sw2: Pole A, common; role: Switch common; lead colour: not specified. - sw3: Pole A, down; role: Switch tag; lead colour: not specified. - sw4: Pole B, up; role: Switch tag; lead colour: not specified. - sw5: Pole B, common; role: Switch common; lead colour: not specified. - sw6: Pole B, down; role: Switch tag; lead colour: not specified. ## Internal connections No internal connections listed. ## Source references No source references listed. ## Retailer references No retailer references listed. This catalog is a reference, not a retailer. Illustrations are schematic. Confirm the exact component revision and manufacturer specifications before purchase or soldering. ## Use this component [Add to my parts](). Opens the app; sign-in, Pro access and explicit confirmation are required before anything is saved. Visiting this link does not add a part.