# Emerson Custom Emerson Pro CTS blender / no-load 250 kΩ

Canonical page: https://guitarwiring.app/catalog/emerson-pro-cts-noload-250k

Emerson Custom Pro CTS. Official StewMac copy: 250 kΩ custom audio taper, 10% tolerance, brass shaft and bushing, no detent. As a tone pot, at 10 it is removed from the circuit (no-load). As a blender it can mix neck or bridge into Strat positions 1/2/4/5.

Category: [Potentiometers](<https://guitarwiring.app/catalog/category/potentiometers/index.md>)

Manufacturer: [Emerson Custom](<https://guitarwiring.app/catalog/manufacturer/emerson/index.md>)

Type: No load

## Specifications

- Resistance Ohm: 250000 Ω
- Taper: No load
- Is No Load: Yes
- Is Blend: Yes
- Shaft Kind: Split knurled
- Body Diameter Mm: 24 mm
- Bushing Thread: 3/8-32
- Switch Kind: None
- Casing Is Ground: Yes

## Terminals

- lug1: Lug 1 (CCW end); role: Lug ccw; lead colour: not specified.
- lug2: Lug 2 (wiper); role: Lug wiper; lead colour: not specified.
- lug3: Lug 3 (CW end); role: Lug cw; lead colour: not specified.
- can: Can (casing); role: Casing; lead colour: not specified; ground by default.
- lug4: Lug 4 (gang B, CCW end); role: Lug ccw; lead colour: not specified.
- lug5: Lug 5 (gang B, wiper); role: Lug wiper; lead colour: not specified.
- lug6: Lug 6 (gang B, CW end); role: Lug cw; lead colour: not specified.

## Internal connections

No internal connections listed.

## Source references

No source references listed.

## Retailer references

No retailer references listed.

This catalog is a reference, not a retailer. Illustrations are schematic. Confirm the exact component revision and manufacturer specifications before purchase or soldering.

## Use this component

[Add to my parts](<https://app.guitarwiring.app/inventory/add/emerson-pro-cts-noload-250k>). Opens the app; sign-in, Pro access and explicit confirmation are required before anything is saved. Visiting this link does not add a part.