# Ichika Nito: Ibanez ICHI10 wiring

Canonical page: https://guitarwiring.app/player-wiring/ichika-nito

Three R1 single coils on Ibanez's dyna-MIX8 switching: a five-way switch plus a mini switch that puts pairs of pickups in series, with one volume and one tone.

## Pickups

- Neck: Ibanez R1 (Single coil)
- Middle: Ibanez R1 (Single coil)
- Bridge: Ibanez R1 (Single coil)

## Controls and switching

- Controls: One volume, one tone, a five-way switch and a mini (alter) switch
- Mini switch: Turns two-hum tap mode on and off
- Mode off, positions 1 to 5: Neck; neck and middle; middle; middle and bridge; bridge
- Mode on, positions 1 and 5: Neck and middle in series, then middle and bridge in series
- Mode on, position 3: Neck and bridge together

## Not published by the maker

- Pot values
- Tone capacitor value

## Wiring diagram

The closest drawing in the library. The same circuit as the ICHI10 with its mini switch off: three single coils on a five-way with one volume and one tone. The series modes behind the mini switch are not in this drawing.: [Three single coils, five-way, volume and tone](<https://guitarwiring.app/wiring-diagrams/seymour-duncan/three-singles-five-way-volume-tone/index.md>)

## Sources

- [Ibanez: ICHI10](<https://www.ibanez.com/usa/products/detail/ichi10_1p_03.html>)

Independent reference by Tinkercaster; not endorsed by Ichika Nito or Ibanez.
