# Kiko Loureiro: Ibanez KIKO100 wiring

Canonical page: https://guitarwiring.app/player-wiring/kiko-loureiro

DiMarzio KIKO pickups, humbucker, single coil, humbucker, on a five-way switch with a tone and a push/pull volume that taps the humbuckers.

## Pickups

- Neck: DiMarzio KIKO original (Humbucker)
- Middle: DiMarzio KIKO original (Single coil)
- Bridge: DiMarzio KIKO original (Humbucker)

## Controls and switching

- Controls: One push/pull volume, one tone and a five-way switch
- Volume knob pulled up: Coil tap on
- Tap off, positions 1, 3 and 5: Neck humbucker, middle single coil, bridge humbucker
- Tap off, positions 2 and 4: The neck side of the neck pickup with the middle, then the middle with the neck side of the bridge pickup
- Tap on, positions 1 and 5: The neck side of the neck pickup, the bridge side of the bridge pickup

## Not published by the maker

- Pot values
- Tone capacitor value

## Wiring diagram

The closest drawing in the library. The nearest drawing we have: humbucker, single coil, humbucker on a five-way with a tone and a push/pull volume that splits the humbuckers. It is drawn with Seymour Duncan wire colors, and the KIKO100 also splits a humbucker in the in-between positions with the knob down. Check each position against the positions listed on this page.: [HSH, 5-way blade, push/pull split volume and tone](<https://guitarwiring.app/wiring-diagrams/seymour-duncan/hsh-five-way-push-pull-split-volume-tone/index.md>)

## Sources

- [Ibanez: KIKO100](<https://www.ibanez.com/usa/products/detail/kiko100_00_05.html>)

Independent reference by Tinkercaster; not endorsed by Kiko Loureiro or Ibanez, DiMarzio.
