# Martin Miller: Ibanez MM1 wiring

Canonical page: https://guitarwiring.app/player-wiring/martin-miller

Two Seymour Duncan Hyperion humbuckers on Ibanez's dyna-MIX10 switching: a five-way switch plus a mini switch for ten sounds, with one volume and one tone.

## Pickups

- Neck: Seymour Duncan Hyperion (Humbucker)
- Bridge: Seymour Duncan Hyperion (Humbucker)

## Controls and switching

- Controls: One volume, one tone, a five-way switch and a mini (alter) switch
- Mini switch: Turns power tap mode on and off
- Power tap off, positions 1, 3 and 5: Neck humbucker, both humbuckers, bridge humbucker
- Power tap off, positions 2 and 4: The two inner coils together, then the two outer coils together
- Power tap on: Each position uses the same pickups in power tap mode, and positions 2 and 4 become one coil each

## Not published by the maker

- Pot values
- Tone capacitor value
- How power tap mode is wired

## Wiring diagram

The closest drawing in the library. The nearest drawing we have: two Seymour Duncan humbuckers on a five-way super switch that splits to the inner coils, with a volume and a tone. The MM1 adds a mini switch and its power tap mode, which Ibanez does not publish as a wiring diagram.: [Two humbuckers, super switch (auto split to inner coils), volume and tone](<https://guitarwiring.app/wiring-diagrams/seymour-duncan/two-humbuckers-super-switch-volume-tone-inner/index.md>)

## Sources

- [Ibanez: MM1](<https://www.ibanez.com/usa/products/detail/mm1_00_03.html>)

Independent reference by Tinkercaster; not endorsed by Martin Miller or Ibanez, Seymour Duncan.
