# Relentless P Plug-In with one volume and one tone

Canonical page: https://guitarwiring.app/wiring-diagrams/dimarzio/relentless-p-plugin-volume-tone

One P-Bass · No switch · One volume · One tone

DiMarzio Relentless P Neck DP299 through a 500K custom-taper volume, a 250K custom-taper tone and a .033 µF capacitor, to a Switchcraft two-conductor jack.

Drawing: https://guitarwiring.app/wiring-diagrams/dimarzio/relentless-p-plugin-volume-tone.svg (back of controls)

## Parts and values

- Relentless P: Relentless P Neck DP299; generic (Single-coil pickup (two-conductor))
- Volume 500K custom taper: Volume 500K custom taper pot (EP1201); 500k; compatible example (CTS 500k Audio Pot)
- Tone 250K custom taper: Tone 250K custom taper pot (EP1200); 250k; compatible example (CTS 250k Audio Pot)
- .033µF: .033µF capacitor (EP1033); 33nF; compatible example (Orange Drop .033µF)
- Output jack: Switchcraft output jack, 2-conductor (EP1301); compatible example (Switchcraft \#11)
- Bridge ground: TO BRIDGE GROUND; generic (Bridge ground wire)

## Specific to this wiring

- The Relentless P Plug-In is drawn as two coils with WHITE and BARE leads and a BLACK series link between the coils.
- WHITE goes to the volume's input lug; BARE ends on the volume casing.
- The volume's ground lug is bent onto the casing. TO BRIDGE GROUND ends on the volume casing.
- The tone is drawn with its lugs up. The volume's input lug jumps to the tone's left lug; the .033µF capacitor (EP1033) sits on the tone's middle lug with its other leg on the tone casing.
- The jack lugs are not labelled in the source: the lug fed from the volume's middle lug is the tip and the lug wired to the casing ground is the sleeve.

## Connections

1. Pickup ground → Volume casing (case)
2. Volume ground lug → Volume casing (case): Short black link.
3. .033µF capacitor → Tone casing (case)
4. Tone casing → Volume casing (case)
5. Volume casing → Jack sleeve (wire)
6. TO BRIDGE GROUND → Volume casing (shield)
7. Pickup hot (white) → Volume input lug (wire, white)
8. Volume middle lug → Jack tip (wire)
9. Volume input lug → Tone left lug (wire)
10. Tone middle lug → .033µF capacitor (wire)

## What each position does

- Always on: Relentless P. Source: One P-Bass, no selector.

- The P-Bass is modelled as a generic single coil; the split-coil/hum-cancelling construction is not modelled.
- The source's custom-taper pots are not reproduced: both pots are simulated with a linear track, so settings between the knob ends are approximate.
- Tone capacitor value matches the printed .033µF.
- Pickup resistance is not specified, so no numeric meter readings are given.

## Check before plugging in

- With both pots up, the meter across the jack should read the pickup resistance.
- The jack sleeve should read continuity to the volume casing, the tone casing and the bridge ground wire.

## Source

Tinkercaster's own drawing of the DiMarzio diagram DiMarzio Relentless P™ Plug-In Wiring, revision 1. Not the manufacturer's artwork and not endorsed by DiMarzio.

See also [all wiring diagrams](<https://guitarwiring.app/wiring-diagrams/index.md>).