# Dave Mustaine actives, toggle, master volume

Canonical page: https://guitarwiring.app/wiring-diagrams/seymour-duncan/dave-mustaine-toggle-volume

Two Dave Mustaine actives · Three-way toggle · Master volume 100K

Dave Mustaine actives, toggle, master volume. Transcribed from the manufacturer wiring sheet.

Drawing: https://guitarwiring.app/wiring-diagrams/seymour-duncan/dave-mustaine-toggle-volume.svg (back of controls)

## Parts and values

- Neck Dave Mustaine: Neck Dave Mustaine; compatible example (Blackouts Active Humbucker)
- Bridge Dave Mustaine: Bridge Dave Mustaine; compatible example (Blackouts Active Humbucker)
- 3-way toggle: 3-way toggle; compatible example (Switchcraft 3-Way Toggle)
- Master volume 100K: Master volume 100K; 25k; compatible example (EMG 25K Pot)
- Stereo output jack: Stereo output jack; compatible example (Switchcraft \#12B)
- 9V battery clip: 9V battery clip; compatible example (9V Battery Clip)
- Bridge ground: Bridge ground; generic (Bridge ground wire)

## Specific to this wiring

- Dave Mustaine active humbuckers drawn on the source sheet; catalog part seymour-duncan-blackout-humbucker is used as an active topology stand-in.
- Pickup whites feed the toggle before the master volume as drawn.

## Connections

1. 3-way toggle T4 → Master volume 100K casing (wire, black)
2. Neck Dave Mustaine gnd → Master volume 100K casing (wire, bare)
3. Bridge Dave Mustaine gnd → Master volume 100K casing (wire, bare)
4. Master volume 100K lug1 → Master volume 100K casing (wire, ground)
5. Stereo output jack sleeve → Master volume 100K casing (wire, black)
6. Bridge ground ground → Master volume 100K casing (wire, black)
7. Neck Dave Mustaine hot → 3-way toggle T1 (wire, white)
8. Bridge Dave Mustaine hot → 3-way toggle T2 (wire, white)
9. 3-way toggle T3 → Master volume 100K lug3 (wire, black)
10. Neck Dave Mustaine vplus → 9V battery clip vplus (wire, red)
11. Bridge Dave Mustaine vplus → 9V battery clip vplus (wire, red)
12. 9V battery clip vminus → Stereo output jack ring (wire, black)
13. Master volume 100K lug2 → Stereo output jack tip (wire, black)

## What each position does

- Always on (active): No pickup reaches the output. Source: Passive simulation is not applied to active pickups; wiring topology only.

- Active pickup gain and frequency response are not simulated.
- The catalog active buffer is approximated with seymour-duncan-blackout-humbucker terminals.

## Check before plugging in



## Source

Tinkercaster's own drawing of the Seymour Duncan diagram 2Dave\_Mustaine\_3G\_1V, revision 1. Not the manufacturer's artwork and not endorsed by Seymour Duncan.

See also [all wiring diagrams](<https://guitarwiring.app/wiring-diagrams/index.md>).