# Tele two Tele stacks, volume push-pull split, tone

Canonical page: https://guitarwiring.app/wiring-diagrams/seymour-duncan/tele-two-tele-stacks-volume-push-pull-split-tone

Two Tele stacks · Three-way · Volume push/pull split · Tone

Tele two Tele stacks, volume push-pull split, tone. Transcribed from the manufacturer wiring sheet and checked against the engine.

Drawing: https://guitarwiring.app/wiring-diagrams/seymour-duncan/tele-two-tele-stacks-volume-push-pull-split-tone.svg (back of controls)

## Parts and values

- Neck Tele stack: Neck Tele stack; generic (Humbucker (four-conductor, Seymour Duncan colours))
- Bridge Tele stack: Bridge Tele stack; generic (Humbucker (four-conductor, Seymour Duncan colours))
- 3-Way Blade: 3-Way Blade; compatible example (CRL 3-Way Blade)
- Volume 250k push/pull: Volume 250k push/pull; 250k; compatible example (250k Push-Pull DPDT)
- Tone 250k: Tone 250k; 250k; compatible example (CTS 250k Audio Pot)
- .047 cap: .047 cap; 47nF; compatible example (Orange Drop .047µF)
- Output Jack: Output Jack; compatible example (Switchcraft \#11)
- Ground wire from bridge: Ground wire from bridge; generic (Bridge ground wire)

## Specific to this wiring

- Tele stacks modelled as generic four-conductor humbuckers with Seymour Duncan lead colours (stand-in).
- Volume and tone printed 250k; push/pull splits both stacks.
- Solder = location for ground (earth) connections.
- Switch tags mapped by function where unlabelled.

## Connections

1. w7 as drawn → w7 as drawn (wire, green)
2. w8 as drawn → w8 as drawn (wire, bare)
3. w9 as drawn → w9 as drawn (wire, green)
4. w10 as drawn → w10 as drawn (wire, bare)
5. w11 as drawn → w11 as drawn (wire, black)
6. w12 as drawn → w12 as drawn (wire, ground)
7. w16 as drawn → w16 as drawn (wire, black)
8. w17 as drawn → w17 as drawn (wire, black)
9. w18 as drawn → w18 as drawn (wire, black)
10. w23 as drawn → w23 as drawn (wire, black)
11. w24 as drawn → w24 as drawn (wire, black)
12. w1 as drawn → w1 as drawn (wire, black)
13. w2 as drawn → w2 as drawn (wire, black)
14. w3 as drawn → w3 as drawn (wire, black)
15. w4 as drawn → w4 as drawn (wire, black)
16. w5 as drawn → w5 as drawn (wire, black)
17. w6 as drawn → w6 as drawn (wire, black)
18. w19 as drawn → w19 as drawn (wire, red)
19. w20 as drawn → w20 as drawn (wire, white)
20. w21 as drawn → w21 as drawn (wire, red)
21. w22 as drawn → w22 as drawn (wire, white)
22. w13 as drawn → w13 as drawn (wire, black)
23. w14 as drawn → w14 as drawn (wire, black)
24. w15 as drawn → w15 as drawn (wire, black)

## What each position does

- Position 1: Neck Tele stack (both coils). Source: Engine reading of the transcribed board.
- Position 1 (pull): Neck Tele stack (split to one coil). Source: Engine reading of the transcribed board.
- Position 2: Neck Tele stack (both coils) and Bridge Tele stack (both coils) in parallel. Source: Engine reading of the transcribed board.
- Position 2 (pull): Neck Tele stack (split to one coil) and Bridge Tele stack (split to one coil) in parallel. Source: Engine reading of the transcribed board.
- Position 3: Bridge Tele stack (both coils). Source: Engine reading of the transcribed board.
- Position 3 (pull): Bridge Tele stack (split to one coil). Source: Engine reading of the transcribed board.

- Tele stack pickups are stand-ins: generic four-conductor humbuckers; stacked construction is not modelled beyond series coils.

## Check before plugging in



## Source

Tinkercaster's own drawing of the Seymour Duncan diagram Tele\_2TSTK\_3B\_1VppSPL\_1T, revision 1. Not the manufacturer's artwork and not endorsed by Seymour Duncan.

See also [all wiring diagrams](<https://guitarwiring.app/wiring-diagrams/index.md>).