# Two humbuckers, toggle, two volumes and two tones

Canonical page: https://guitarwiring.app/wiring-diagrams/tonerider/two-humbuckers-toggle-two-volumes-two-tones

Two humbuckers, toggle, two volumes and two tones

Two humbuckers, toggle, two volumes and two tones. Transcribed from the manufacturer wiring sheet and checked against the engine.

Drawing: https://guitarwiring.app/wiring-diagrams/tonerider/two-humbuckers-toggle-two-volumes-two-tones.svg (back of controls)

## Parts and values

- Neck Pickup: Neck Pickup; compatible example (Humbucker (four-conductor, DiMarzio colours))
- Bridge Pickup: Bridge Pickup; compatible example (Humbucker (four-conductor, DiMarzio colours))
- 3-Way Toggle: 3-Way Toggle; compatible example (Switchcraft 3-Way Toggle)
- Neck Volume 500kA: Neck Volume 500kA; 500k; compatible example (CTS 500k Audio Pot)
- Bridge Volume 500kA: Bridge Volume 500kA; 500k; compatible example (CTS 500k Audio Pot)
- Neck Tone 500kA: Neck Tone 500kA; 500k; compatible example (CTS 500k Audio Pot)
- Bridge Tone 500kA: Bridge Tone 500kA; 500k; compatible example (CTS 500k Audio Pot)
- Output Jack: Output Jack; compatible example (Switchcraft \#11)
- Bridge ground: Bridge ground; compatible example (Bridge ground wire)
- .022µf (neck): .022µf (neck); 22nF; compatible example (Orange Drop .022µF)
- .022µf (bridge): .022µf (bridge); 22nF; compatible example (Orange Drop .022µF)

## Specific to this wiring

- Promoted after catalog/engine unlock.

## Connections

1. Neck Pickup gnd → Neck Volume 500kA casing (wire, green)
2. Neck Pickup bare → Neck Volume 500kA casing (wire, bare)
3. Bridge Pickup gnd → Bridge Volume 500kA casing (wire, green)
4. Bridge Pickup bare → Bridge Volume 500kA casing (wire, bare)
5. Neck Tone 500kA lug1 → Neck Tone 500kA casing (wire, ground)
6. Bridge Tone 500kA lug1 → Bridge Tone 500kA casing (wire, ground)
7. Neck Volume 500kA lug1 → Neck Volume 500kA casing (wire, ground)
8. Bridge Volume 500kA lug1 → Bridge Volume 500kA casing (wire, ground)
9. Bridge Volume 500kA casing → Neck Volume 500kA casing (wire, ground)
10. Neck Tone 500kA casing → Neck Volume 500kA casing (wire, ground)
11. Bridge Tone 500kA casing → Bridge Volume 500kA casing (wire, ground)
12. 3-Way Toggle T4 → Neck Tone 500kA casing (wire, ground)
13. Output Jack sleeve → Bridge Tone 500kA casing (wire, ground)
14. Bridge ground ground → Neck Volume 500kA casing (wire, ground)
15. Neck Volume 500kA lug2 → 3-Way Toggle T1 (wire, signal)
16. Bridge Volume 500kA lug2 → 3-Way Toggle T2 (wire, signal)
17. 3-Way Toggle T3 → Output Jack tip (wire, signal)
18. Neck Pickup black → Neck Pickup white (wire, black)
19. Neck Pickup hot → Neck Volume 500kA lug3 (wire, red)
20. Bridge Pickup black → Bridge Pickup white (wire, black)
21. Bridge Pickup hot → Bridge Volume 500kA lug3 (wire, red)
22. Neck Volume 500kA lug3 → .022µf (neck) a (wire, white)
23. .022µf (neck) b → Neck Tone 500kA lug2 (wire, white)
24. Bridge Volume 500kA lug3 → .022µf (bridge) a (wire, white)
25. .022µf (bridge) b → Bridge Tone 500kA lug2 (wire, white)

## What each position does

- Position 1: Neck Pickup (both coils). Source: Engine reading of the transcribed board.
- Position 2: Neck Pickup (both coils) and Bridge Pickup (both coils) in parallel. Source: Engine reading of the transcribed board.
- Position 3: Bridge Pickup (both coils). Source: Engine reading of the transcribed board.

- Custom tapers are not reproduced; pots are simulated as linear.

## Check before plugging in



## Source

Tinkercaster's own drawing of the Tonerider diagram 2\_HB\_2V\_2T\_3-way\_toggle, revision 1. Not the manufacturer's artwork and not endorsed by Tonerider.

See also [all wiring diagrams](<https://guitarwiring.app/wiring-diagrams/index.md>).