TinkercasterDiMarzio EP1201PP 500 kΩ push-pull
500 k custom-taper pot with DPDT push-pull
Named on DiMarzio's official 4-conductor instructions as the 500 k push-pull (EP1200PP is the 250 k sibling). DPDT switch in the pot, suitable for Dual Sound, phase, or coil-split without drilling extra holes.
Connections at a glance
Use the terminal labels below when planning your circuit. Check the manufacturer's documentation for your exact component revision.
| Terminal | Label | Role | Lead colour |
|---|---|---|---|
| lug1 | Lug 1 (CCW end) | Lug ccw | Not listed |
| lug2 | Lug 2 (wiper) | Lug wiper | Not listed |
| lug3 | Lug 3 (CW end) | Lug cw | Not listed |
| can | Can (casing) | Casing · Ground | Not listed |
| sw1 | Pole A, up | Switch tag | Not listed |
| sw2 | Pole A, common | Switch common | Not listed |
| sw3 | Pole A, down | Switch tag | Not listed |
| sw4 | Pole B, up | Switch tag | Not listed |
| sw5 | Pole B, common | Switch common | Not listed |
| sw6 | Pole B, down | Switch tag | Not listed |