TinkercasterTriple Shot Mounting Ring
Whole ring: W/G/B/R/Gnd pads, white/black/bare lead
Seymour Duncan Triple Shot switching mounting ring as one part. Four settings from the installation sheet: series, parallel, slug coil, adjustable coil (standard SD 4-conductor wiring).
Connections at a glance
Use the terminal labels below when planning your circuit. Check the manufacturer's documentation for your exact component revision.
| Terminal | Label | Role | Lead colour |
|---|---|---|---|
| B | Pad B (pickup black) | Switch tag | Not listed |
| W | Pad W (pickup white) | Switch tag | Not listed |
| R | Pad R (pickup red) | Switch tag | Not listed |
| G | Pad G (pickup green) | Switch tag | Not listed |
| GND | Pad Gnd (pickup bare) | Switch tag | Not listed |
| OUT_WHITE | Ring lead white (hot out) | Switch common | Not listed |
| OUT_BLACK | Ring lead black (ground) | Switch common | Not listed |
| OUT_BARE | Ring lead bare (ground) | Switch tag | Not listed |
Triple Shot ring (four documented settings)
| Position | Function |
|---|---|
| 1 | Series humbucker |
| 2 | Parallel humbucker |
| 3 | Slug coil on |
| 4 | Adjustable coil on |