HSS five-way with two tones and mini-toggle coil split

Parts and values

“Example part” means any part with the same value and lugs will do; the source does not name a brand. “Generic” stands in for an unspecified pickup: check your own pickup's lead colours before you solder.

Specific to this wiring

• Mini-toggle tags mapped by function from the catalog contact table where the source leaves them unlabelled.
• The engine steps the pickup selector; standalone mini-toggles share that position index (modifier contacts close when the index matches).

Connections

In soldering order: grounds first, then the switch, the pickups and the signal path.

What each position does

Checked with the Tinkercaster wiring engine against the switching the source describes.

• Mini-toggle lever states are not independently enumerated; they share the pickup-selector position index.

Before you solder

• Identify every lead on your pickups against the source's colours.
• Mini-toggle tags mapped by function from the catalog contact table where the source leaves them unlabelled.
• The engine steps the pickup selector; standalone mini-toggles share that position index (modifier contacts close when the index matches).
• Use a small amount of solder, heat both surfaces, and hold the joint still as it cools. Lead-free solder may have a matte finish.

Ticks are kept in this browser only, as a reminder. They are not a check of your joints. New to soldering? Read the soldering cheat sheet.

Check before plugging in

Measure across the output jack with a multimeter on its resistance range. No exact readings are given where the source does not specify the pickups.