Parts and values
| In the drawing | Value | Part |
|---|---|---|
| Neck single coil sized humbucker | — | Little '59 SL59-1 Neck (Strat-size) |
| Middle Strat Stack Plus | — | Strat Stack Plus |
| Bridge single coil sized humbucker | — | Little '59 SL59-1 Bridge (Strat-size) |
| 5-Way Switch | — | Oak Grigsby 5-Way |
| Volume 250k | 250k | CTS 250k Audio Pot |
| Tone 250k | 250k | CTS 250k Audio Pot |
| .047 µF tone cap | 47nF | Orange Drop .047µF |
| Output Jack | — | Switchcraft #11 |
| Ground wire to bridge | — | Bridge ground wire |
Every pickup is the maker's own. “As specified” means the sheet names that part. “Example part” means the sheet names no model: the pickup shown is one of the maker's with the same leads, and any pot, cap or switch with the same value and lugs will do. “Generic” is a plain part such as a ground wire. “Not on the sheet; stand-in” means the sheet prints no value for that part, so the value shown is the usual one, not the maker's.
Understand this wiring
- Seymour Duncan humbucker wire colors
See the pickup, recognise its two halves, and learn where each coloured wire goes.
Connections
In soldering order: grounds first, then the switch, the pickups and the signal path.
| # | From | To | How |
|---|---|---|---|
| 1 | Neck single coil sized humbucker green (ground) | Volume casing (upper Solder spot) | To a pot casing |
| 2 | Neck single coil sized humbucker bare | Volume casing (upper Solder spot) | Shield or ground |
| 3 | Middle Strat Stack Plus black (ground) | Volume casing (upper Solder spot) | To a pot casing |
| 4 | Middle Strat Stack Plus drain | Volume casing (upper Solder spot) | Shield or ground |
| 5 | Bridge single coil sized humbucker green (ground) | Volume casing (upper Solder spot) | To a pot casing |
| 6 | Bridge single coil sized humbucker bare | Volume casing (upper Solder spot) | Shield or ground |
| 7 | Ground wire to bridge | Volume casing | To a pot casing |
| 8 | Volume third lug | Volume casing | To a pot casing |
| 9 | Volume casing (upper Solder spot) | Jack sleeve | Wire |
| 10 | .047 cap | Tone casing (Solder spot) | To a pot casing |
| 11 | Tone casing (Solder spot) | Volume casing (lower Solder spot) | To a pot casing |
| 12 | Bridge single coil sized humbucker black (hot) | Blade upper-left row, first lug | Wire |
| 13 | Middle Strat Stack Plus white (hot) | Blade upper-left row, second lug | Wire |
| 14 | Neck single coil sized humbucker black (hot) | Blade upper-left row, third lug | Wire |
| 15 | Blade upper-left row, fourth lug | Blade lower-right row, first lug | Wire |
| 16 | Blade lower-right row, first lug | Volume first lug | Wire |
| 17 | Neck single coil sized humbucker white | Neck single coil sized humbucker red | Joined and insulated |
| 18 | Bridge single coil sized humbucker white | Bridge single coil sized humbucker red | Joined and insulated |
| 19 | Volume middle lug | Jack tip | Wire |
| 20 | Volume first lug | Tone outer lug | Wire |
| 21 | Tone middle lug | .047 cap | Wire |
What each position does
| Setting | The source | Engine result |
|---|---|---|
| Position 1: Bridge | No legend printed; follows the labelled leads on the blade's standard contacts. | Bridge single coil sized humbucker (both coils). |
| Position 2: Bridge + middle | No legend printed; follows the labelled leads on the blade's standard contacts. | Middle Strat Stack Plus (both coils) and Bridge single coil sized humbucker (both coils) in parallel. |
| Position 3: Middle | No legend printed; follows the labelled leads on the blade's standard contacts. | Middle Strat Stack Plus (both coils). |
| Position 4: Middle + neck | No legend printed; follows the labelled leads on the blade's standard contacts. | Neck single coil sized humbucker (both coils) and Middle Strat Stack Plus (both coils) in parallel. |
| Position 5: Neck | No legend printed; follows the labelled leads on the blade's standard contacts. | Neck single coil sized humbucker (both coils). |
Checked with the Tinkercaster wiring engine against the switching the source describes.
- The on-board component drawn across the bottom-coil pads of each Strat Stack Plus (no value printed) is not modelled.
- The single-coil-sized humbuckers are drawn as the Little '59 SL59-1 (Strat-size); hum cancelling and phase follow its lead colours and coil polarity as Seymour Duncan publishes them.
- The sheet prints no position legend; the expected states follow the blade's standard contacts and the drawn lead labels.
- Pickup resistance is not specified, so no numeric meter readings are given.
Before you solder
Ticks are kept in this browser only, as a reminder. They are not a check of your joints. New to soldering? Read the soldering cheat sheet .
Check before plugging in
- In each blade position the meter across the jack reads the pickup or pickup pair selected.
- Each taped red & white joint and each taped Strat Stack Plus red reads about one coil's resistance to ground and to the hot lead, roughly half the pickup's total: not open, and not zero.
Measure across the output jack with a multimeter on its resistance range. No exact readings are given where the source does not specify the pickups.