Wiring guides, by pickup maker
The same four wire colors mean different things on different brands. Pick the maker of your pickup and read what its own documents say.
Seymour Duncan wiring guides
- Seymour Duncan humbucker wire colors
See the pickup, recognise its two halves, and learn where each coloured wire goes.
- Seymour Duncan coil splitting explained
A humbucker has two coils. See how a switch lets you use just one of them.
- Seymour Duncan phase reversal explained
See what swapping two pickup wires changes when you play two pickups together.
- Reading Seymour Duncan push/pull switch diagrams
Turning the knob and pulling it do different jobs. See the actual part, then try its switch connections.
- Understanding the Seymour Duncan kill switch
A kill switch silences the guitar without turning down the volume. Follow the signal from pickup to cable.
- Seymour Duncan series, split and parallel wiring
Two coils can work in a chain, side by side, or one at a time. See the difference before choosing a switch.
- Seymour Duncan active/passive preamp bypass explained
Choose between the pickup signal and the preamp output. See what the switch actually bypasses.
- Seymour Duncan phase switching with coil split or parallel
Two switches interact. See what changes when coil selection and phase reversal share a pickup.
- Seymour Duncan single-coil and Tele phase reversal
Swap the coil connections while keeping metal parts and the guitar strings grounded.
- Seymour Duncan Music Man three-way wiring explained
Read the parallel, split and series positions, and check that the replacement pickup matches the bass.
- Seymour Duncan PRS-type five-way rotary conversion
See the five pickup combinations and why this conversion calls for a bridge magnet reversal.
DiMarzio wiring guides
- DiMarzio humbucker wire colors
Red is hot, black and white join each other, green and bare go to ground. See why, and what changes when you reverse the phase.
- DiMarzio coil splitting explained
A switch sends the black and white pair to ground, which turns one coil off. See what to wire and what it does to the sound.
- DiMarzio series/parallel (Dual Sound) wiring
One switch, two humbucking sounds: full power in series, cleaner and brighter in parallel. Here is the lug-by-lug wiring from DiMarzio's sheet.
- DiMarzio phase reversal and the phase switch
Out of phase is the hollow, quieter sound of two pickups working against each other. Fix it by swapping red and green, or put it on a switch.
- DiMarzio treble bleed and pot values
Keep the highs when you turn down, and choose between 250K, 500K and 1 Meg pots, using the values DiMarzio publishes.