Parts and values
| In the drawing | Value | Part |
|---|---|---|
| Neck Pro Track (rail) | — | Pro Track |
| Middle Fast Track 1 (rail) | — | DiMarzio Fast Track 1 DP181 |
| Bridge Fast Track 2 (rail) | — | DiMarzio Fast Track 2 DP182 |
| Five-way switch | — | Oak Grigsby 5-Way |
| Volume 500K custom taper | 500k | CTS 500k Audio Pot |
| Neck tone 250K custom taper | 250k | CTS 250k Audio Pot |
| Bridge tone 250K custom taper | 250k | CTS 250k Audio Pot |
| .022µF | 22nF | Orange Drop .022µF |
| Output jack | — | Switchcraft #11 |
| Bridge ground | — | Bridge ground wire |
Every pickup is the maker's own. “As specified” means the sheet names that part. “Example part” means the sheet names no model: the pickup shown is one of the maker's with the same leads, and any pot, cap or switch with the same value and lugs will do. “Generic” is a plain part such as a ground wire. “Not on the sheet; stand-in” means the sheet prints no value for that part, so the value shown is the usual one, not the maker's.
Understand this wiring
- DiMarzio humbucker wire colors
Red is hot, black and white join each other, green and bare go to ground. See why, and what changes when you reverse the phase.
Connections
In soldering order: grounds first, then the switch, the pickups and the signal path.
| # | From | To | How |
|---|---|---|---|
| 1 | Neck Pro Track (rail) gnd | Volume 500K custom taper casing | Wire |
| 2 | Neck Pro Track (rail) bare | Volume 500K custom taper casing | Wire |
| 3 | Middle Fast Track 1 (rail) gnd | Volume 500K custom taper casing | Wire |
| 4 | Middle Fast Track 1 (rail) bare | Volume 500K custom taper casing | Wire |
| 5 | Bridge Fast Track 2 (rail) gnd | Volume 500K custom taper casing | Wire |
| 6 | Bridge Fast Track 2 (rail) bare | Volume 500K custom taper casing | Wire |
| 7 | Volume 500K custom taper casing | Volume 500K custom taper lug1 | Wire |
| 8 | Volume 500K custom taper lug1 | Neck tone 250K custom taper casing | Wire |
| 9 | Neck tone 250K custom taper casing | .022µF a | Wire |
| 10 | Neck tone 250K custom taper casing | Bridge tone 250K custom taper casing | Wire |
| 11 | Bridge tone 250K custom taper casing | Output jack sleeve | Wire |
| 12 | Bridge ground ground | Output jack sleeve | Wire |
| 13 | Neck Pro Track (rail) hot | Five-way switch T2 | Wire |
| 14 | Middle Fast Track 1 (rail) hot | Five-way switch T1 | Wire |
| 15 | Bridge Fast Track 2 (rail) hot | Five-way switch T3 | Wire |
| 16 | Five-way switch T8 | Five-way switch T4 | Wire |
| 17 | Five-way switch T4 | Volume 500K custom taper lug3 | Wire |
| 18 | Neck tone 250K custom taper lug2 | Five-way switch T6 | Wire |
| 19 | Bridge tone 250K custom taper lug1 | Five-way switch T7 | Wire |
| 20 | Neck Pro Track (rail) black | Neck Pro Track (rail) white | Wire |
| 21 | Middle Fast Track 1 (rail) black | Middle Fast Track 1 (rail) white | Wire |
| 22 | Bridge Fast Track 2 (rail) black | Bridge Fast Track 2 (rail) white | Wire |
| 23 | Volume 500K custom taper lug2 | Output jack tip | Wire |
| 24 | .022µF b | Neck tone 250K custom taper lug1 | Wire |
| 25 | Neck tone 250K custom taper lug1 | Bridge tone 250K custom taper lug2 | Wire |
What each position does
| Setting | The source | Engine result |
|---|---|---|
| Position 1 | Engine reading of the transcribed board; matches the source legend. | Bridge Fast Track 2 (rail) (both coils). |
| Position 2 | Engine reading of the transcribed board; matches the source legend. | Middle Fast Track 1 (rail) (both coils) and Bridge Fast Track 2 (rail) (both coils) in parallel. |
| Position 3 | Engine reading of the transcribed board; matches the source legend. | Middle Fast Track 1 (rail) (both coils). |
| Position 4 | Engine reading of the transcribed board; matches the source legend. | Neck Pro Track (rail) (both coils) and Middle Fast Track 1 (rail) (both coils) in parallel. |
| Position 5 | Engine reading of the transcribed board; matches the source legend. | Neck Pro Track (rail) (both coils). |
Checked with the Tinkercaster wiring engine against the switching the source describes.
- Custom-taper pots are treated as linear by the simulator.
Before you solder
Ticks are kept in this browser only, as a reminder. They are not a check of your joints. New to soldering? Read the soldering cheat sheet .
Check before plugging in
Measure across the output jack with a multimeter on its resistance range. No exact readings are given where the source does not specify the pickups.