Parts and values
| In the drawing | Value | Part |
|---|---|---|
| Neck Area 58 (stacked) | — | Area 58 DP415 |
| Middle Area 67 (stacked) | — | Area 67 DP419 |
| Bridge Area 61 (stacked) | — | Area 61 DP416 |
| Five-way switch | — | Oak Grigsby 5-Way |
| Volume 250K custom taper | 250k | CTS 250k Audio Pot |
| Neck tone 250K custom taper | 250k | CTS 250k Audio Pot |
| Bridge tone 250K custom taper | 250k | CTS 250k Audio Pot |
| .022µF | 22nF | Orange Drop .022µF |
| Output jack | — | Switchcraft #11 |
| Bridge ground | — | Bridge ground wire |
Every pickup is the maker's own. “As specified” means the sheet names that part. “Example part” means the sheet names no model: the pickup shown is one of the maker's with the same leads, and any pot, cap or switch with the same value and lugs will do. “Generic” is a plain part such as a ground wire. “Not on the sheet; stand-in” means the sheet prints no value for that part, so the value shown is the usual one, not the maker's.
Understand this wiring
- DiMarzio humbucker wire colors
Red is hot, black and white join each other, green and bare go to ground. See why, and what changes when you reverse the phase.
Connections
In soldering order: grounds first, then the switch, the pickups and the signal path.
| # | From | To | How |
|---|---|---|---|
| 1 | Neck Area 58 (stacked) gnd | Five-way switch T2 | Wire |
| 2 | Middle Area 67 (stacked) gnd | Five-way switch T1 | Wire |
| 3 | Bridge Area 61 (stacked) gnd | Five-way switch T3 | Wire |
| 4 | Neck Area 58 (stacked) hot | Volume 250K custom taper casing | Wire |
| 5 | Neck Area 58 (stacked) bare | Volume 250K custom taper casing | Wire |
| 6 | Middle Area 67 (stacked) hot | Volume 250K custom taper casing | Wire |
| 7 | Middle Area 67 (stacked) bare | Volume 250K custom taper casing | Wire |
| 8 | Bridge Area 61 (stacked) hot | Volume 250K custom taper casing | Wire |
| 9 | Bridge Area 61 (stacked) bare | Volume 250K custom taper casing | Wire |
| 10 | Volume 250K custom taper casing | Volume 250K custom taper lug1 | Wire |
| 11 | Volume 250K custom taper lug1 | Neck tone 250K custom taper casing | Wire |
| 12 | Neck tone 250K custom taper casing | .022µF a | Wire |
| 13 | Neck tone 250K custom taper casing | Bridge tone 250K custom taper casing | Wire |
| 14 | Bridge tone 250K custom taper casing | Output jack sleeve | Wire |
| 15 | Bridge ground ground | Output jack sleeve | Wire |
| 16 | Five-way switch T8 | Five-way switch T4 | Wire |
| 17 | Five-way switch T4 | Volume 250K custom taper lug3 | Wire |
| 18 | Neck tone 250K custom taper lug2 | Five-way switch T6 | Wire |
| 19 | Bridge tone 250K custom taper lug1 | Five-way switch T7 | Wire |
| 20 | Neck Area 58 (stacked) black | Neck Area 58 (stacked) white | Wire |
| 21 | Middle Area 67 (stacked) black | Middle Area 67 (stacked) white | Wire |
| 22 | Bridge Area 61 (stacked) black | Bridge Area 61 (stacked) white | Wire |
| 23 | Volume 250K custom taper lug2 | Output jack tip | Wire |
| 24 | .022µF b | Neck tone 250K custom taper lug1 | Wire |
| 25 | Neck tone 250K custom taper lug1 | Bridge tone 250K custom taper lug2 | Wire |
What each position does
| Setting | The source | Engine result |
|---|---|---|
| Position 1 | Engine reading of the transcribed board; matches the source legend. | Bridge Area 61 (stacked) (both coils). |
| Position 2 | Engine reading of the transcribed board; matches the source legend. | Middle Area 67 (stacked) (both coils) and Bridge Area 61 (stacked) (both coils) in parallel. |
| Position 3 | Engine reading of the transcribed board; matches the source legend. | Middle Area 67 (stacked) (both coils). |
| Position 4 | Engine reading of the transcribed board; matches the source legend. | Neck Area 58 (stacked) (both coils) and Middle Area 67 (stacked) (both coils) in parallel. |
| Position 5 | Engine reading of the transcribed board; matches the source legend. | Neck Area 58 (stacked) (both coils). |
Checked with the Tinkercaster wiring engine against the switching the source describes.
- Custom-taper pots are treated as linear by the simulator.
Before you solder
Ticks are kept in this browser only, as a reminder. They are not a check of your joints. New to soldering? Read the soldering cheat sheet .
Check before plugging in
Measure across the output jack with a multimeter on its resistance range. No exact readings are given where the source does not specify the pickups.