Parts and values
| In the drawing | Value | Part |
|---|---|---|
| Neck Tele pickup | — | Vintage Tele Rhythm STR-1 |
| Middle Tele pickup | — | Vintage Tele Rhythm STR-1 |
| Bridge Tele pickup | — | Vintage '54 Tele Lead STL-1 |
| 5-Way Switch | — | Oak Grigsby 5-Way |
| Volume pot 250k | 250k | CTS 250k Audio Pot |
| Tone pot 250k (cap tone, fed in positions 4-5) | 250k | CTS 250k Audio Pot |
| Tone pot 250k (fed in positions 2-4) | 250k | CTS 250k Audio Pot |
| .022 cap | 22nF | Orange Drop .022µF |
| Output jack | — | Switchcraft #11 |
| Bridge ground | — | Bridge ground wire |
Every pickup is the maker's own. “As specified” means the sheet names that part. “Example part” means the sheet names no model: the pickup shown is one of the maker's with the same leads, and any pot, cap or switch with the same value and lugs will do. “Generic” is a plain part such as a ground wire. “Not on the sheet; stand-in” means the sheet prints no value for that part, so the value shown is the usual one, not the maker's.
Connections
In soldering order: grounds first, then the switch, the pickups and the signal path.
| # | From | To | How |
|---|---|---|---|
| 1 | Neck pickup black | volume casing (Solder) | Wire |
| 2 | Middle pickup black | volume casing (Solder) | Wire |
| 3 | Bridge pickup black | volume casing (Solder) | Wire |
| 4 | Volume grounded end lug | volume casing (Solder) | Wire |
| 5 | Tone cap lead | cap tone's casing (Solder) | Wire |
| 6 | Cap tone casing | other tone casing | Wire |
| 7 | Volume casing | jack sleeve | Wire |
| 8 | Ground wire from bridge | volume casing | Wire |
| 9 | Volume casing | cap tone casing (drawn as a dashed line) | Wire |
| 10 | Neck pickup white | switch first-row lug that is live in positions 4-5 (T2) | Wire |
| 11 | Middle pickup white | switch first-row lug live in positions 2-4 (T1) | Wire |
| 12 | Bridge pickup white | switch first-row lug live in positions 1-2 (T3) | Wire |
| 13 | First-row common (T4) | second-row common (T8): jumper between the two commons | Wire |
| 14 | Second-row common (T8) | volume input end lug | Wire |
| 15 | Cap tone middle lug | switch second-row fifth lug (positions 4-5) | Wire |
| 16 | Other tone end lug | switch second-row third lug (positions 2-4) | Wire |
| 17 | Volume middle lug | jack tip | Wire |
| 18 | Tone cap other lead | cap tone's end lug | Wire |
| 19 | Cap tone's cap end lug | other tone's middle lug | Wire |
What each position does
| Setting | The source | Engine result |
|---|---|---|
| Position 1 · bridge | No position legend is printed; written from the drawn switch wiring with the standard 5-way throws (bridge on the positions 1-2 lug). | Bridge Tele pickup. |
| Position 2 · bridge + middle | No position legend is printed; written from the drawn switch wiring with the standard 5-way throws (bridge on the positions 1-2 lug). | Middle Tele pickup and Bridge Tele pickup in parallel. |
| Position 3 · middle | No position legend is printed; written from the drawn switch wiring with the standard 5-way throws (bridge on the positions 1-2 lug). | Middle Tele pickup. |
| Position 4 · middle + neck | No position legend is printed; written from the drawn switch wiring with the standard 5-way throws (bridge on the positions 1-2 lug). | Neck Tele pickup and Middle Tele pickup in parallel. |
| Position 5 · neck | No position legend is printed; written from the drawn switch wiring with the standard 5-way throws (bridge on the positions 1-2 lug). | Neck Tele pickup. |
Not simulated: this circuit is drawn for reference only.
- The dashed volume-to-tone casing line has no legend on the sheet and is modelled as a ground connection; the board stays topology-only until that reading is confirmed.
Before you solder
Ticks are kept in this browser only, as a reminder. They are not a check of your joints. New to soldering? Read the soldering cheat sheet .
Check before plugging in
Measure across the output jack with a multimeter on its resistance range. No exact readings are given where the source does not specify the pickups.