Parts and values
| In the drawing | Value | Part |
|---|---|---|
| Neck Live Wire | — | Live Wire Active Single Coil |
| Middle Live Wire | — | Live Wire Active Single Coil |
| Bridge Live Wire | — | Live Wire Active Single Coil |
| 5-way blade | — | Oak Grigsby 5-Way |
| Master volume 100k | 100k | 100K Pot |
| Output jack (stereo) | — | Switchcraft #12B |
| Battery 1 clip | — | 9V Battery Clip |
| Battery 2 clip | — | 9V Battery Clip |
Every pickup is the maker's own. “As specified” means the sheet names that part. “Example part” means the sheet names no model: the pickup shown is one of the maker's with the same leads, and any pot, cap or switch with the same value and lugs will do. “Generic” is a plain part such as a ground wire. “Not on the sheet; stand-in” means the sheet prints no value for that part, so the value shown is the usual one, not the maker's.
Connections
In soldering order: grounds first, then the switch, the pickups and the signal path.
| # | From | To | How |
|---|---|---|---|
| 1 | Neck Live Wire bare lead | Master volume 100k casing (Solder spot) | To a pot casing |
| 2 | Middle Live Wire bare lead | Master volume 100k casing (Solder spot) | To a pot casing |
| 3 | Bridge Live Wire bare lead | Master volume 100k casing (Solder spot) | To a pot casing |
| 4 | Master volume 100k third lug | Master volume 100k casing (Solder spot) | To a pot casing |
| 5 | Master volume 100k casing (Solder spot) | Output jack (stereo) Sleeve (ground) | To a pot casing |
| 6 | Neck Live Wire white lead | 5-way blade pickup-side row, third lug from top (neck) | Wire |
| 7 | Middle Live Wire white lead | 5-way blade pickup-side row, second lug from top (middle) | Wire |
| 8 | Bridge Live Wire white lead | 5-way blade pickup-side row, top lug (bridge) | Wire |
| 9 | 5-way blade pickup-side row, bottom lug (common) | 5-way blade second row, top lug (common) | Wire |
| 10 | 5-way blade second row, top lug (common) | Master volume 100k input lug | Wire |
| 11 | Neck Live Wire red lead | Battery 2 clip red lead | Wire |
| 12 | Middle Live Wire red lead | Battery 2 clip red lead | Wire |
| 13 | Bridge Live Wire red lead | Battery 2 clip red lead | Wire |
| 14 | Master volume 100k middle lug | Output jack (stereo) Tip (hot output) | Wire |
| 15 | Battery 1 clip black lead | Output jack (stereo) Ring (battery ground) | Wire |
| 16 | Battery 1 clip red lead | Battery 2 clip black lead | Wire |
What each position does
| Setting | The source | Engine result |
|---|---|---|
| Bridge | Positions are not printed on the sheet; derived from the standard five-way contact table. Active pickups: wiring topology only. | No pickup reaches the output. |
| Bridge + middle | Positions are not printed on the sheet; derived from the standard five-way contact table. Active pickups: wiring topology only. | No pickup reaches the output. |
| Middle | Positions are not printed on the sheet; derived from the standard five-way contact table. Active pickups: wiring topology only. | No pickup reaches the output. |
| Middle + neck | Positions are not printed on the sheet; derived from the standard five-way contact table. Active pickups: wiring topology only. | No pickup reaches the output. |
| Neck | Positions are not printed on the sheet; derived from the standard five-way contact table. Active pickups: wiring topology only. | No pickup reaches the output. |
Not simulated: this circuit is drawn for reference only.
- Active Live Wire pickups and their battery supply are not simulated (engine limit: active); the board is wiring topology only.
- The sheet prints 100k with no taper; the audio taper of the catalog part is an assumption.
Before you solder
Ticks are kept in this browser only, as a reminder. They are not a check of your joints. New to soldering? Read the soldering cheat sheet .
Check before plugging in
- With no plug in the jack, the battery negative should read open to ground; with a stereo plug inserted, the ring should connect it to the sleeve.
- The joined red leads should read the battery positive (the two batteries in series) against ground with a plug inserted.
Measure across the output jack with a multimeter on its resistance range. No exact readings are given where the source does not specify the pickups.