Parts and values
| In the drawing | Value | Part |
|---|---|---|
| Neck Pickup | — | '59 Model SH-1 Neck |
| Bridge Pickup | — | JB Model SH-4 |
| 3-Way Toggle | — | Switchcraft 3-Way Toggle |
| Phase switch ON/ON mini-toggle | — | DPDT Mini-Toggle |
| Volume 500k | 500k | CTS 500k Audio Pot |
| Neck Tone 500k | 500k | CTS 500k Audio Pot |
| Bridge Tone 500k | 500k | CTS 500k Audio Pot |
| .047 cap | 47nF | Orange Drop .047µF |
| .047 cap | 47nF | Orange Drop .047µF |
| Output Jack | — | Switchcraft #11 |
| Bridge ground | — | Bridge ground wire |
Every pickup is the maker's own. “As specified” means the sheet names that part. “Example part” means the sheet names no model: the pickup shown is one of the maker's with the same leads, and any pot, cap or switch with the same value and lugs will do. “Generic” is a plain part such as a ground wire. “Not on the sheet; stand-in” means the sheet prints no value for that part, so the value shown is the usual one, not the maker's.
Understand this wiring
- Seymour Duncan humbucker wire colors
See the pickup, recognise its two halves, and learn where each coloured wire goes.
- Seymour Duncan phase reversal explained
See what swapping two pickup wires changes when you play two pickups together.
- Reading Seymour Duncan push/pull switch diagrams
Turning the knob and pulling it do different jobs. See the actual part, then try its switch connections.
Connections
In soldering order: grounds first, then the switch, the pickups and the signal path.
| # | From | To | How |
|---|---|---|---|
| 1 | Neck Pickup bare | Neck Tone 500k casing | Wire |
| 2 | Bridge Pickup bare | Bridge Tone 500k casing | Wire |
| 3 | Neck Pickup gnd | Neck Tone 500k casing | Wire |
| 4 | Bridge Pickup gnd | Phase switch ON/ON mini-toggle T5 | Wire |
| 5 | Phase switch ON/ON mini-toggle T3 | Bridge Tone 500k casing | Wire |
| 6 | .047 cap b | Neck Tone 500k casing | Wire |
| 7 | .047 cap b | Bridge Tone 500k casing | Wire |
| 8 | 3-Way Toggle T4 | Volume 500k casing | Wire |
| 9 | Volume 500k lug1 | Volume 500k casing | Wire |
| 10 | Volume 500k casing | Output Jack sleeve | Wire |
| 11 | Bridge ground ground | Volume 500k casing | Wire |
| 12 | Neck Tone 500k casing | Volume 500k casing | Wire |
| 13 | Bridge Tone 500k casing | Volume 500k casing | Wire |
| 14 | Neck Pickup black | 3-Way Toggle T1 | Wire |
| 15 | Bridge Pickup hot | Phase switch ON/ON mini-toggle T2 | Wire |
| 16 | Phase switch ON/ON mini-toggle T6 | Bridge Tone 500k lug1 | Wire |
| 17 | Phase switch ON/ON mini-toggle T1 | Phase switch ON/ON mini-toggle T6 | Wire |
| 18 | Phase switch ON/ON mini-toggle T4 | Phase switch ON/ON mini-toggle T3 | Wire |
| 19 | 3-Way Toggle T3 | Volume 500k lug3 | Wire |
| 20 | Bridge Tone 500k lug1 | 3-Way Toggle T2 | Wire |
| 21 | Neck Pickup red | Neck Pickup white | Wire |
| 22 | Bridge Pickup red | Bridge Pickup white | Wire |
| 23 | Neck Pickup hot | Neck Tone 500k lug1 | Wire |
| 24 | .047 cap a | Neck Tone 500k lug2 | Wire |
| 25 | .047 cap a | Bridge Tone 500k lug2 | Wire |
| 26 | Volume 500k lug2 | Output Jack tip | Wire |
What each position does
| Setting | The source | Engine result |
|---|---|---|
| Neck, phase up (in phase) | Legend: phase Up: in phase, Down: out of phase. The phase switch reverses the bridge humbucker only. | Neck Pickup (both coils). |
| Both, phase up (in phase) | Legend: phase Up: in phase, Down: out of phase. The phase switch reverses the bridge humbucker only. | Neck Pickup (both coils) and Bridge Pickup (both coils) in parallel. |
| Bridge, phase up (in phase) | Legend: phase Up: in phase, Down: out of phase. The phase switch reverses the bridge humbucker only. | Bridge Pickup (both coils). |
| Neck, phase down (out of phase) | Legend: phase Up: in phase, Down: out of phase. The phase switch reverses the bridge humbucker only. | Neck Pickup (both coils). |
| Both, phase down (out of phase) | Legend: phase Up: in phase, Down: out of phase. The phase switch reverses the bridge humbucker only. | Neck Pickup (both coils) and Bridge Pickup (both coils) in parallel. |
| Bridge, phase down (out of phase) | Legend: phase Up: in phase, Down: out of phase. The phase switch reverses the bridge humbucker only. | Bridge Pickup (both coils). |
| Position 1, board at rest: Neck, phase up (in phase) | Legend: phase Up: in phase, Down: out of phase. The phase switch reverses the bridge humbucker only. | Neck Pickup (both coils). |
| Position 2, board at rest: Both, phase up (in phase) | Legend: phase Up: in phase, Down: out of phase. The phase switch reverses the bridge humbucker only. | Neck Pickup (both coils) and Bridge Pickup (both coils) in parallel. |
| Position 3, board at rest: Bridge, phase up (in phase) | Legend: phase Up: in phase, Down: out of phase. The phase switch reverses the bridge humbucker only. | Bridge Pickup (both coils). |
Checked with the Tinkercaster wiring engine against the switching the source describes.
- The engine does not report phase; the out-of-phase states record the legend in their notes and list the same pickups as in phase.
- The phase mini-toggle is modelled with switchPosition: throw 1 = the top row (Up per the legend), throw 2 = the bottom row (Down).
Before you solder
Ticks are kept in this browser only, as a reminder. They are not a check of your joints. New to soldering? Read the soldering cheat sheet .
Check before plugging in
Measure across the output jack with a multimeter on its resistance range. No exact readings are given where the source does not specify the pickups.