Parts and values
| In the drawing | Value | Part |
|---|---|---|
| Neck pickup | — | '59 Model SH-1 Neck |
| Bridge pickup | — | JB Model SH-4 |
| Neck Triple Shot ring | — | Triple Shot Mounting Ring |
| Bridge Triple Shot ring | — | Triple Shot Mounting Ring |
| 3-way toggle | — | Switchcraft 3-Way Toggle |
| Neck volume 500k | 500k | CTS 500k Audio Pot |
| Bridge volume 500k | 500k | CTS 500k Audio Pot |
| Master tone 500k | 500k | CTS 500k Audio Pot |
| Tone .047 cap | 47nF | Orange Drop .047µF |
| Output jack | — | Switchcraft #11 |
| Bridge ground | — | Bridge ground wire |
Every pickup is the maker's own. “As specified” means the sheet names that part. “Example part” means the sheet names no model: the pickup shown is one of the maker's with the same leads, and any pot, cap or switch with the same value and lugs will do. “Generic” is a plain part such as a ground wire. “Not on the sheet; stand-in” means the sheet prints no value for that part, so the value shown is the usual one, not the maker's.
Understand this wiring
- Seymour Duncan humbucker wire colors
See the pickup, recognise its two halves, and learn where each coloured wire goes.
- Seymour Duncan coil splitting explained
A humbucker has two coils. See how a switch lets you use just one of them.
- Seymour Duncan series, split and parallel wiring
Two coils can work in a chain, side by side, or one at a time. See the difference before choosing a switch.
Connections
In soldering order: grounds first, then the switch, the pickups and the signal path.
| # | From | To | How |
|---|---|---|---|
| 1 | Neck pickup green | Neck ring pad G | Wire |
| 2 | Neck pickup bare | Neck ring pad Gnd | Wire |
| 3 | Bridge pickup green | Bridge ring pad G | Wire |
| 4 | Bridge pickup bare | Bridge ring pad Gnd | Wire |
| 5 | Neck ring cable black | Neck volume casing (Solder) | Wire |
| 6 | Neck ring cable bare | Neck volume casing (Solder) | Wire |
| 7 | Bridge ring cable black | Bridge volume casing (Solder) | Wire |
| 8 | Bridge ring cable bare | Bridge volume casing (Solder) | Wire |
| 9 | Neck volume right lug | Neck volume casing | Wire |
| 10 | Bridge volume bent lug | Bridge volume casing (Solder) | Wire |
| 11 | .047 cap | Master tone casing | Wire |
| 12 | Neck volume casing (Solder) | Toggle frame lug | Wire |
| 13 | Neck volume casing (at the bent lug) | Bridge volume casing (Solder) | Wire |
| 14 | Bridge volume casing (Solder) | Master tone casing (Solder) | Wire |
| 15 | Bridge Ground | Bridge volume casing (Solder) | Wire |
| 16 | Jack sleeve | Bridge volume casing (Solder) | Wire |
| 17 | Neck pickup black | Neck ring pad B | Wire |
| 18 | Neck pickup white | Neck ring pad W | Wire |
| 19 | Neck pickup red | Neck ring pad R | Wire |
| 20 | Bridge pickup black | Bridge ring pad B | Wire |
| 21 | Bridge pickup white | Bridge ring pad W | Wire |
| 22 | Bridge pickup red | Bridge ring pad R | Wire |
| 23 | Neck ring cable white | Neck volume left lug | Wire |
| 24 | Bridge ring cable white | Bridge volume right lug (drawn lugs up) | Wire |
| 25 | Neck volume middle lug | Toggle top lug | Wire |
| 26 | Bridge volume middle lug | Toggle bottom lug | Wire |
| 27 | Toggle middle lug | Master tone bottom lug | Wire |
| 28 | Master tone bottom lug | Jack tip | Wire |
| 29 | Master tone middle lug | .047 cap | Wire |
What each position does
| Setting | The source | Engine result |
|---|---|---|
| Neck, neck ring series, bridge ring series | — | Neck pickup (both coils). |
| Middle, neck ring series, bridge ring series | — | Neck pickup (both coils) and Bridge pickup (both coils) in parallel. |
| Bridge, neck ring series, bridge ring series | — | Bridge pickup (both coils). |
| Neck, neck ring series, bridge ring parallel | — | Neck pickup (both coils). |
| Middle, neck ring series, bridge ring parallel | — | Neck pickup (both coils) and Bridge pickup (coils in parallel) in parallel. |
| Bridge, neck ring series, bridge ring parallel | — | Bridge pickup (coils in parallel). |
| Neck, neck ring series, bridge ring slug coil | — | Neck pickup (both coils). |
| Middle, neck ring series, bridge ring slug coil | — | Neck pickup (both coils) and Bridge pickup (split to one coil) in parallel. |
| Bridge, neck ring series, bridge ring slug coil | — | Bridge pickup (split to one coil). |
| Neck, neck ring series, bridge ring adjustable coil | — | Neck pickup (both coils). |
| Middle, neck ring series, bridge ring adjustable coil | — | Neck pickup (both coils) and Bridge pickup (split to one coil) in parallel. |
| Bridge, neck ring series, bridge ring adjustable coil | — | Bridge pickup (split to one coil). |
| Neck, neck ring parallel, bridge ring series | — | Neck pickup (coils in parallel). |
| Middle, neck ring parallel, bridge ring series | — | Neck pickup (coils in parallel) and Bridge pickup (both coils) in parallel. |
| Bridge, neck ring parallel, bridge ring series | — | Bridge pickup (both coils). |
| Neck, neck ring parallel, bridge ring parallel | — | Neck pickup (coils in parallel). |
| Middle, neck ring parallel, bridge ring parallel | — | Neck pickup (coils in parallel) and Bridge pickup (coils in parallel) in parallel. |
| Bridge, neck ring parallel, bridge ring parallel | — | Bridge pickup (coils in parallel). |
| Neck, neck ring parallel, bridge ring slug coil | — | Neck pickup (coils in parallel). |
| Middle, neck ring parallel, bridge ring slug coil | — | Neck pickup (coils in parallel) and Bridge pickup (split to one coil) in parallel. |
| Bridge, neck ring parallel, bridge ring slug coil | — | Bridge pickup (split to one coil). |
| Neck, neck ring parallel, bridge ring adjustable coil | — | Neck pickup (coils in parallel). |
| Middle, neck ring parallel, bridge ring adjustable coil | — | Neck pickup (coils in parallel) and Bridge pickup (split to one coil) in parallel. |
| Bridge, neck ring parallel, bridge ring adjustable coil | — | Bridge pickup (split to one coil). |
| Neck, neck ring slug coil, bridge ring series | — | Neck pickup (split to one coil). |
| Middle, neck ring slug coil, bridge ring series | — | Neck pickup (split to one coil) and Bridge pickup (both coils) in parallel. |
| Bridge, neck ring slug coil, bridge ring series | — | Bridge pickup (both coils). |
| Neck, neck ring slug coil, bridge ring parallel | — | Neck pickup (split to one coil). |
| Middle, neck ring slug coil, bridge ring parallel | — | Neck pickup (split to one coil) and Bridge pickup (coils in parallel) in parallel. |
| Bridge, neck ring slug coil, bridge ring parallel | — | Bridge pickup (coils in parallel). |
| Neck, neck ring slug coil, bridge ring slug coil | — | Neck pickup (split to one coil). |
| Middle, neck ring slug coil, bridge ring slug coil | — | Neck pickup (split to one coil) and Bridge pickup (split to one coil) in parallel. |
| Bridge, neck ring slug coil, bridge ring slug coil | — | Bridge pickup (split to one coil). |
| Neck, neck ring slug coil, bridge ring adjustable coil | — | Neck pickup (split to one coil). |
| Middle, neck ring slug coil, bridge ring adjustable coil | — | Neck pickup (split to one coil) and Bridge pickup (split to one coil) in parallel. |
| Bridge, neck ring slug coil, bridge ring adjustable coil | — | Bridge pickup (split to one coil). |
| Neck, neck ring adjustable coil, bridge ring series | — | Neck pickup (split to one coil). |
| Middle, neck ring adjustable coil, bridge ring series | — | Neck pickup (split to one coil) and Bridge pickup (both coils) in parallel. |
| Bridge, neck ring adjustable coil, bridge ring series | — | Bridge pickup (both coils). |
| Neck, neck ring adjustable coil, bridge ring parallel | — | Neck pickup (split to one coil). |
| Middle, neck ring adjustable coil, bridge ring parallel | — | Neck pickup (split to one coil) and Bridge pickup (coils in parallel) in parallel. |
| Bridge, neck ring adjustable coil, bridge ring parallel | — | Bridge pickup (coils in parallel). |
| Neck, neck ring adjustable coil, bridge ring slug coil | — | Neck pickup (split to one coil). |
| Middle, neck ring adjustable coil, bridge ring slug coil | — | Neck pickup (split to one coil) and Bridge pickup (split to one coil) in parallel. |
| Bridge, neck ring adjustable coil, bridge ring slug coil | — | Bridge pickup (split to one coil). |
| Neck, neck ring adjustable coil, bridge ring adjustable coil | — | Neck pickup (split to one coil). |
| Middle, neck ring adjustable coil, bridge ring adjustable coil | — | Neck pickup (split to one coil) and Bridge pickup (split to one coil) in parallel. |
| Bridge, neck ring adjustable coil, bridge ring adjustable coil | — | Bridge pickup (split to one coil). |
Not simulated: this circuit is drawn for reference only.
- Each Triple Shot ring is modelled from Seymour Duncan's Triple Shot installation sheet (four settings: 1 series, 2 parallel, 3 slug coil, 4 adjustable coil); the wiring sheet draws only the ring's pads, cable and ribbon.
- Hum cancelling and phase follow the pickups' lead colours and coil polarity as Seymour Duncan publishes them; nothing here is measured.
- Pickup resistance is not specified, so no numeric meter readings are given.
- The cap value is printed small and low-resolution; it is read as .047, matching the sibling sheets' printed label.
- Topology only: each Triple Shot ring's four settings are modelled from Seymour Duncan's installation sheet rather than this wiring sheet. The engine agrees with every expected state (48 of 48).
Before you solder
Ticks are kept in this browser only, as a reminder. They are not a check of your joints. New to soldering? Read the soldering cheat sheet .
Check before plugging in
- Both rings on series: each toggle position reads the selected humbucker, or both in parallel in the middle.
- The master tone sits on the toggle output, so it works in every position.
Measure across the output jack with a multimeter on its resistance range. No exact readings are given where the source does not specify the pickups.