Parts and values
| In the drawing | Value | Part |
|---|---|---|
| Neck Pickup | — | '59 Model SH-1 Neck |
| Bridge Pickup | — | JB Model SH-4 |
| Switchcraft 3-Way Toggle | — | Switchcraft 3-Way Toggle |
| Neck volume 500k push/pull (split) | 500k | 500k Push-Pull DPDT |
| Bridge volume 500k push/pull (split) | 500k | 500k Push-Pull DPDT |
| Neck tone 500k push/pull (series) | 500k | 500k Push-Pull DPDT |
| Bridge tone 500k push/pull (phase) | 500k | 500k Push-Pull DPDT |
| .047 cap | 47nF | Orange Drop .047µF |
| .047 cap | 47nF | Orange Drop .047µF |
| Switchcraft #11 | — | Switchcraft #11 |
| Bridge ground | — | Bridge ground wire |
Every pickup is the maker's own. “As specified” means the sheet names that part. “Example part” means the sheet names no model: the pickup shown is one of the maker's with the same leads, and any pot, cap or switch with the same value and lugs will do. “Generic” is a plain part such as a ground wire. “Not on the sheet; stand-in” means the sheet prints no value for that part, so the value shown is the usual one, not the maker's.
Understand this wiring
- Seymour Duncan humbucker wire colors
See the pickup, recognise its two halves, and learn where each coloured wire goes.
- Seymour Duncan coil splitting explained
A humbucker has two coils. See how a switch lets you use just one of them.
- Seymour Duncan phase reversal explained
See what swapping two pickup wires changes when you play two pickups together.
- Reading Seymour Duncan push/pull switch diagrams
Turning the knob and pulling it do different jobs. See the actual part, then try its switch connections.
- Seymour Duncan series, split and parallel wiring
Two coils can work in a chain, side by side, or one at a time. See the difference before choosing a switch.
- Seymour Duncan phase switching with coil split or parallel
Two switches interact. See what changes when coil selection and phase reversal share a pickup.
Connections
In soldering order: grounds first, then the switch, the pickups and the signal path.
| # | From | To | How |
|---|---|---|---|
| 1 | Neck volume 500k push/pull (split) lug1 | Neck volume 500k push/pull (split) casing | Wire |
| 2 | Neck volume 500k push/pull (split) sw1 | Neck Pickup gnd | Wire |
| 3 | Neck Pickup gnd | Neck tone 500k push/pull (series) sw2 | Wire |
| 4 | Neck tone 500k push/pull (series) sw3 | Neck tone 500k push/pull (series) casing | Wire |
| 5 | Neck Pickup bare | Neck volume 500k push/pull (split) casing | Wire |
| 6 | Bridge Pickup gnd | Bridge tone 500k push/pull (phase) sw5 | Wire |
| 7 | Bridge tone 500k push/pull (phase) sw6 | Bridge tone 500k push/pull (phase) casing | Wire |
| 8 | Bridge tone 500k push/pull (phase) sw1 | Bridge tone 500k push/pull (phase) sw6 | Wire |
| 9 | Bridge Pickup bare | Bridge volume 500k push/pull (split) casing | Wire |
| 10 | Bridge volume 500k push/pull (split) lug1 | Bridge volume 500k push/pull (split) casing | Wire |
| 11 | .047 cap b | Neck tone 500k push/pull (series) casing | Wire |
| 12 | .047 cap b | Bridge tone 500k push/pull (phase) casing | Wire |
| 13 | Switchcraft 3-Way Toggle T4 | Neck volume 500k push/pull (split) casing | Wire |
| 14 | Neck volume 500k push/pull (split) casing | Bridge volume 500k push/pull (split) casing | Wire |
| 15 | Neck tone 500k push/pull (series) casing | Neck volume 500k push/pull (split) casing | Wire |
| 16 | Bridge tone 500k push/pull (phase) casing | Bridge volume 500k push/pull (split) casing | Wire |
| 17 | Bridge volume 500k push/pull (split) casing | Switchcraft #11 sleeve | Wire |
| 18 | Bridge ground ground | Bridge tone 500k push/pull (phase) casing | Wire |
| 19 | Neck volume 500k push/pull (split) lug3 | Switchcraft 3-Way Toggle T1 | Wire |
| 20 | Bridge volume 500k push/pull (split) lug3 | Switchcraft 3-Way Toggle T2 | Wire |
| 21 | Switchcraft 3-Way Toggle T3 | Switchcraft #11 tip | Wire |
| 22 | Neck Pickup hot | Neck volume 500k push/pull (split) lug2 | Wire |
| 23 | Neck Pickup white | Neck Pickup red | Wire |
| 24 | Neck Pickup red | Neck volume 500k push/pull (split) sw2 | Wire |
| 25 | Bridge Pickup hot | Bridge volume 500k push/pull (split) sw2 | Wire |
| 26 | Bridge Pickup white | Bridge Pickup red | Wire |
| 27 | Bridge Pickup red | Bridge volume 500k push/pull (split) sw1 | Wire |
| 28 | Neck tone 500k push/pull (series) sw1 | Bridge tone 500k push/pull (phase) sw3 | Wire |
| 29 | Bridge tone 500k push/pull (phase) sw3 | Neck tone 500k push/pull (series) sw5 | Wire |
| 30 | Bridge tone 500k push/pull (phase) sw4 | Bridge tone 500k push/pull (phase) sw3 | Wire |
| 31 | Bridge volume 500k push/pull (split) lug2 | Neck tone 500k push/pull (series) sw6 | Wire |
| 32 | Neck tone 500k push/pull (series) lug2 | Neck volume 500k push/pull (split) lug2 | Wire |
| 33 | Bridge tone 500k push/pull (phase) lug2 | Bridge volume 500k push/pull (split) lug2 | Wire |
| 34 | .047 cap a | Neck tone 500k push/pull (series) lug1 | Wire |
| 35 | .047 cap a | Bridge tone 500k push/pull (phase) lug1 | Wire |
| 36 | Bridge volume 500k push/pull (split) sw2 | Bridge tone 500k push/pull (phase) sw2 | Wire |
What each position does
| Setting | The source | Engine result |
|---|---|---|
| Neck p4=down p5=down p6=down p7=down | Engine reading of the transcribed board. | Neck Pickup (both coils). |
| Neck p4=down p5=down p6=down p7=up | Engine reading of the transcribed board. | Neck Pickup (both coils). |
| Neck p4=down p5=down p6=up p7=down | Engine reading of the transcribed board. | Neck Pickup (both coils) and Bridge Pickup (both coils) in series. |
| Neck p4=down p5=down p6=up p7=up | Engine reading of the transcribed board. | Neck Pickup (both coils) and Bridge Pickup (both coils) in series. |
| Neck p4=down p5=up p6=down p7=down | Engine reading of the transcribed board. | Neck Pickup (both coils). |
| Neck p4=down p5=up p6=down p7=up | Engine reading of the transcribed board. | Neck Pickup (both coils). |
| Neck p4=down p5=up p6=up p7=down | Engine reading of the transcribed board. | Neck Pickup (both coils) and Bridge Pickup (split to one coil) in series. |
| Neck p4=down p5=up p6=up p7=up | Engine reading of the transcribed board. | Neck Pickup (both coils) and Bridge Pickup (split to one coil) in series. |
| Neck p4=up p5=down p6=down p7=down | Engine reading of the transcribed board. | Neck Pickup (split to one coil). |
| Neck p4=up p5=down p6=down p7=up | Engine reading of the transcribed board. | Neck Pickup (split to one coil). |
| Neck p4=up p5=down p6=up p7=down | Engine reading of the transcribed board. | Neck Pickup (split to one coil) and Bridge Pickup (both coils) in series. |
| Neck p4=up p5=down p6=up p7=up | Engine reading of the transcribed board. | Neck Pickup (split to one coil) and Bridge Pickup (both coils) in series. |
| Neck p4=up p5=up p6=down p7=down | Engine reading of the transcribed board. | Neck Pickup (split to one coil). |
| Neck p4=up p5=up p6=down p7=up | Engine reading of the transcribed board. | Neck Pickup (split to one coil). |
| Neck p4=up p5=up p6=up p7=down | Engine reading of the transcribed board. | Neck Pickup (split to one coil) and Bridge Pickup (split to one coil) in series. |
| Neck p4=up p5=up p6=up p7=up | Engine reading of the transcribed board. | Neck Pickup (split to one coil) and Bridge Pickup (split to one coil) in series. |
| Neck+Bridge p4=down p5=down p6=down p7=down | Engine reading of the transcribed board. | Neck Pickup (both coils) and Bridge Pickup (both coils) in parallel. |
| Neck+Bridge p4=down p5=down p6=down p7=up | Engine reading of the transcribed board. | Neck Pickup (both coils) and Bridge Pickup (both coils) in parallel. |
| Neck+Bridge p4=down p5=down p6=up p7=down | Engine reading of the transcribed board. | Neck Pickup (both coils) and Bridge Pickup (both coils) in series. |
| Neck+Bridge p4=down p5=down p6=up p7=up | Engine reading of the transcribed board. | Neck Pickup (both coils) and Bridge Pickup (both coils) in series. |
| Neck+Bridge p4=down p5=up p6=down p7=down | Engine reading of the transcribed board. | Neck Pickup (both coils) and Bridge Pickup (split to one coil) in parallel. |
| Neck+Bridge p4=down p5=up p6=down p7=up | Engine reading of the transcribed board. | Neck Pickup (both coils) and Bridge Pickup (split to one coil) in parallel. |
| Neck+Bridge p4=down p5=up p6=up p7=down | Engine reading of the transcribed board. | Neck Pickup (both coils) and Bridge Pickup (split to one coil) in series. |
| Neck+Bridge p4=down p5=up p6=up p7=up | Engine reading of the transcribed board. | Neck Pickup (both coils) and Bridge Pickup (split to one coil) in series. |
| Neck+Bridge p4=up p5=down p6=down p7=down | Engine reading of the transcribed board. | Neck Pickup (split to one coil) and Bridge Pickup (both coils) in parallel. |
| Neck+Bridge p4=up p5=down p6=down p7=up | Engine reading of the transcribed board. | Neck Pickup (split to one coil) and Bridge Pickup (both coils) in parallel. |
| Neck+Bridge p4=up p5=down p6=up p7=down | Engine reading of the transcribed board. | Neck Pickup (split to one coil) and Bridge Pickup (both coils) in series. |
| Neck+Bridge p4=up p5=down p6=up p7=up | Engine reading of the transcribed board. | Neck Pickup (split to one coil) and Bridge Pickup (both coils) in series. |
| Neck+Bridge p4=up p5=up p6=down p7=down | Engine reading of the transcribed board. | Neck Pickup (split to one coil) and Bridge Pickup (split to one coil) in parallel. |
| Neck+Bridge p4=up p5=up p6=down p7=up | Engine reading of the transcribed board. | Neck Pickup (split to one coil) and Bridge Pickup (split to one coil) in parallel. |
| Neck+Bridge p4=up p5=up p6=up p7=down | Engine reading of the transcribed board. | Neck Pickup (split to one coil) and Bridge Pickup (split to one coil) in series. |
| Neck+Bridge p4=up p5=up p6=up p7=up | Engine reading of the transcribed board. | Neck Pickup (split to one coil) and Bridge Pickup (split to one coil) in series. |
| Bridge p4=down p5=down p6=down p7=down | Engine reading of the transcribed board. | Bridge Pickup (both coils). |
| Bridge p4=down p5=down p6=down p7=up | Engine reading of the transcribed board. | Bridge Pickup (both coils). |
| Bridge p4=down p5=down p6=up p7=down | Engine reading of the transcribed board. | No pickup reaches the output. |
| Bridge p4=down p5=down p6=up p7=up | Engine reading of the transcribed board. | No pickup reaches the output. |
| Bridge p4=down p5=up p6=down p7=down | Engine reading of the transcribed board. | Bridge Pickup (split to one coil). |
| Bridge p4=down p5=up p6=down p7=up | Engine reading of the transcribed board. | Bridge Pickup (split to one coil). |
| Bridge p4=down p5=up p6=up p7=down | Engine reading of the transcribed board. | No pickup reaches the output. |
| Bridge p4=down p5=up p6=up p7=up | Engine reading of the transcribed board. | No pickup reaches the output. |
| Bridge p4=up p5=down p6=down p7=down | Engine reading of the transcribed board. | Bridge Pickup (both coils). |
| Bridge p4=up p5=down p6=down p7=up | Engine reading of the transcribed board. | Bridge Pickup (both coils). |
| Bridge p4=up p5=down p6=up p7=down | Engine reading of the transcribed board. | No pickup reaches the output. |
| Bridge p4=up p5=down p6=up p7=up | Engine reading of the transcribed board. | No pickup reaches the output. |
| Bridge p4=up p5=up p6=down p7=down | Engine reading of the transcribed board. | Bridge Pickup (split to one coil). |
| Bridge p4=up p5=up p6=down p7=up | Engine reading of the transcribed board. | Bridge Pickup (split to one coil). |
| Bridge p4=up p5=up p6=up p7=down | Engine reading of the transcribed board. | No pickup reaches the output. |
| Bridge p4=up p5=up p6=up p7=up | Engine reading of the transcribed board. | No pickup reaches the output. |
Checked with the Tinkercaster wiring engine against the switching the source describes.
Before you solder
Ticks are kept in this browser only, as a reminder. They are not a check of your joints. New to soldering? Read the soldering cheat sheet .
Check before plugging in
Measure across the output jack with a multimeter on its resistance range. No exact readings are given where the source does not specify the pickups.