Jimmy Page: Gibson Custom Jimmy Page "Number Two" Les Paul wiring
Two humbuckers with all four controls on push/pull pots, for series or parallel coils and coil splits, plus two more switches under the pickguard.
The closest drawing in our library. Seymour Duncan's version of the idea, with four push/pulls for coil split, phase and series. Gibson's Number Two assigns its pulls differently and adds two switches under the pickguard. Every connection and what each switch position does
Viewed from the back of the controls, as you solder them.
Open the interactive diagram to zoom, move components and try the switches.
Inside the guitar
Pickups
- Bridge
- Gibson Page Version 2 (uncovered)
Controls and switching
- Pickup selector
- Three-way toggle
- Volume knobs, pulled
- That pickup's coils go from series to parallel
- Tone knobs, pulled
- That pickup goes from humbucking to single coil
- Under the pickguard
- Two more switches: one reverses the bridge pickup's phase, the other puts both pickups in series and out of phase; with both out, series and in phase
What the maker does not publish
- Pot values
- Capacitor value
We leave those out instead of guessing. The drawing above shows workable values for the same circuit.
Sources
Every value on this page comes from the pages above. This is an independent reference by Tinkercaster, not endorsed by Jimmy Page or Gibson. Names identify the instruments and parts only.