Yngwie Malmsteen: Fender Yngwie Malmsteen Stratocaster wiring
Three Seymour Duncan YJM Fury hum-cancelling pickups on a three-position blade, with a no-load tone for the middle and bridge.
The closest drawing in our library. The standard Strat circuit with a five-way switch. Malmsteen's has a three-position blade, so no in-between sounds, and its second tone is a no-load pot on the middle and bridge pickups. Every connection and what each switch position does
Viewed from the back of the controls, as you solder them.
Open the interactive diagram to zoom, move components and try the switches.
Inside the guitar
Pickups
- Neck
- Seymour Duncan YJM Fury STK-S10N
- Middle
- Seymour Duncan YJM Fury STK-S10N
- Bridge
- Seymour Duncan YJM Fury STK-S10B
Controls and switching
- Pickup selector
- Three-position blade: bridge, middle, neck
- Volume
- Master volume
- Tone 1
- Neck pickup
- Tone 2
- No-load tone for the middle and bridge pickups
What the maker does not publish
- Pot values
- Tone capacitor value
We leave those out instead of guessing. The drawing above shows workable values for the same circuit.
Sources
Every value on this page comes from the pages above. This is an independent reference by Tinkercaster, not endorsed by Yngwie Malmsteen or Fender, Seymour Duncan. Names identify the instruments and parts only.