Skip to content
Tinkercaster

What Joe Satriani plays

Joe Satriani: Ibanez JS2450 wiring

Two DiMarzio humbuckers, one volume and one tone, each with a push/pull: a high-pass filter and a coil tap.

The closest drawing in our library. DiMarzio drew this for the JS2410, an earlier JS model with the same two controls: volume with a high-pass push/pull and tone with a coil-split push/pull. Every connection and what each switch position does

Viewed from the back of the controls, as you solder them.

Joe Satriani JS2410 volume high-pass tone coil-splitJoe Satriani: Ibanez JS2450 wiring. Joe Satriani JS2410 volume high-pass tone coil-split. Original Tinkercaster drawing with labelled terminals.Neck Satch Track (rail)Bridge Mo Joe500k500k22nF0.33nFredgreenblackwhitebareredgreenblackwhitebareT1T2T3T4T5lug1lug2lug3sw1sw2sw3sw4sw5sw6lug1lug2lug3sw1sw2sw3sw4sw5sw6tipsleeveabgroundabNeck Satch Track (rail)Bridge Mo JoeToggle (straight / straight short)Volume 500K push/pull (high-pass)Tone 500K push/pull (coil split)Output jack.022µFBridge ground330pF

Open the interactive diagram to zoom, move components and try the switches.

Inside the guitar

Pickups

Bridge
DiMarzio Mo' JoeHumbucker

Controls and switching

Volume
Push/pull: a high-pass filter that keeps the highs as you turn downIbanez
Tone
Push/pull: a coil tap for both pickupsIbanez

What the maker does not publish

  • Pot values
  • Tone capacitor value

We leave those out instead of guessing. The drawing above shows workable values for the same circuit.

Sources

Every value on this page comes from the pages above. This is an independent reference by Tinkercaster, not endorsed by Joe Satriani or Ibanez, DiMarzio. Names identify the instruments and parts only.

More players

All players →