Skip to content
Tinkercaster

What Stevie Ray Vaughan plays

Stevie Ray Vaughan: Fender Stevie Ray Vaughan Stratocaster wiring

Three Custom Shop Texas Special single coils on a five-way blade, with a master volume and tones for the neck and middle pickups.

The closest drawing in our library. The standard Strat circuit, which is what Fender lists for this guitar: three single coils, a five-way, a volume and two tones. Fender does not publish its own wiring drawing on the product page. Every connection and what each switch position does

Viewed from the back of the controls, as you solder them.

Three singles, five-way, volume and two tonesStevie Ray Vaughan: Fender Stevie Ray Vaughan Stratocaster wiring. 3 singles · 5-way · 1V · 2T (shared .047). Original Tinkercaster drawing with labelled terminals.Neck pickupMiddle pickupBridge pickup250k250k250k47nFwhiteblackwhiteblackwhiteblackT1T2T3T4T5T6T7T8lug1lug2lug3lug1lug2lug3lug1lug2lug3abtipsleevegroundNeck pickupMiddle pickupBridge pickup5-Way SwitchVolume (value not printed; 250k stand-in)Middle-knob tone (value not printed; 250k stand-in)Lower tone (value not printed; 250k stand-in).047 cap · 47nFOutput jackBridge ground

Open the interactive diagram to zoom, move components and try the switches.

Inside the guitar

Pickups

Controls and switching

Pickup selector
Five-position bladeFender
Volume
Master volumeFender
Tone 1
Neck pickupFender
Tone 2
Middle pickupFender

What the maker does not publish

  • Pot values
  • Tone capacitor value

We leave those out instead of guessing. The drawing above shows workable values for the same circuit.

Sources

Every value on this page comes from the pages above. This is an independent reference by Tinkercaster, not endorsed by Stevie Ray Vaughan or Fender. Names identify the instruments and parts only.

More players

All players →