Richie Kotzen: Fender Richie Kotzen Telecaster wiring
A DiMarzio Twang King and Chopper T on a three-position blade, a master volume, and a rotary switch for series or parallel where the tone would be.
The closest drawing in our library. DiMarzio's Kotzen drawing reaches the series sound with a four-way blade and keeps a tone control. Fender's guitar uses a three-position blade with a separate series/parallel rotary switch, and has no tone control. Every connection and what each switch position does
Viewed from the back of the controls, as you solder them.
Open the interactive diagram to zoom, move components and try the switches.
Inside the guitar
Pickups
- Bridge
- DiMarzio The Chopper T
Controls and switching
- Pickup selector
- Three-position blade: bridge, both, neck
- Volume
- Master volume
- Tone
- No tone control
- Rotary switch
- Series or parallel
What the maker does not publish
- Volume pot value
- How the rotary switch is wired
We leave those out instead of guessing. The drawing above shows workable values for the same circuit.
Sources
Every value on this page comes from the pages above. This is an independent reference by Tinkercaster, not endorsed by Richie Kotzen or Fender, DiMarzio. Names identify the instruments and parts only.