Skip to content
Tinkercaster

Made for Dimebag Darrell

Dimebag Darrell: Seymour Duncan Dimebucker wiring

Seymour Duncan's signature Dimebag bridge humbucker, with a ceramic magnet. No maker documents the rest of his guitar today.

The closest drawing in our library. A plain two-humbucker circuit to start from, with the Dimebucker at the bridge. It is our suggestion, not a documented Dimebag wiring. Every connection and what each switch position does

Viewed from the back of the controls, as you solder them.

Two humbuckers with a three-way toggle, one volume and one toneDimebag Darrell: Seymour Duncan Dimebucker wiring. Two humbuckers · Three-way toggle · One volume · One tone. Original Tinkercaster drawing with labelled terminals.Neck PickupBridge Pickup500k500k47nFblackgreenwhiteredbareblackgreenwhiteredbareT1T2T3T4lug1lug2lug3lug1lug2lug3tipsleeveabgroundNeck PickupBridge Pickup3-Way ToggleVolume 500kTone 500kOutput Jack.047 cap · 47nFBridge ground

Open the interactive diagram to zoom, move components and try the switches.

Inside the guitar

Pickups

Controls and switching

Position
BridgeSeymour Duncan
Magnet
CeramicSeymour Duncan

What the maker does not publish

  • Neck pickup, pot values and control layout: no guitar maker publishes a Dimebag model today

We leave those out instead of guessing. The drawing above shows workable values for the same circuit.

Sources

Every value on this page comes from the pages above. This is an independent reference by Tinkercaster, not endorsed by Dimebag Darrell or Seymour Duncan. Names identify the instruments and parts only.

More players

All players →