Eddie Van Halen: EVH Wolfgang USA Edward Van Halen Signature wiring
Two direct-mount EVH Wolfgang humbuckers, a three-position switch, a low-friction volume with a treble bleed, a 250 kΩ tone and a kill switch.
The closest drawing in our library. A plain two-humbucker circuit with a three-way toggle, a volume and a tone. The Wolfgang adds the treble bleed on the volume and the kill switch. Every connection and what each switch position does
Viewed from the back of the controls, as you solder them.
Open the interactive diagram to zoom, move components and try the switches.
Inside the guitar
Pickups
- Neck
- EVH Wolfgang AL3
- Bridge
- EVH Wolfgang
Controls and switching
- Pickup selector
- Three positions, in reverse order: 1 neck, 2 neck and bridge, 3 bridge
- Volume
- EVH BI Tech HPU low-friction pot with a treble bleed circuit
- Tone
- 250 kΩ EVH Bourns high-friction pot
- Kill switch
- Mutes the guitar
What the maker does not publish
- Volume pot value
- Tone capacitor value
- Treble bleed parts
We leave those out instead of guessing. The drawing above shows workable values for the same circuit.
Sources
Every value on this page comes from the pages above. This is an independent reference by Tinkercaster, not endorsed by Eddie Van Halen or EVH. Names identify the instruments and parts only.