John Petrucci: Ernie Ball Music Man Majesty wiring
A DiMarzio Rainmaker and Dreamcatcher with piezo saddles, an active preamp, a push/push volume for a gain boost and a push/push tone.
The closest drawing in our library. DiMarzio's passive drawing for the Petrucci signature model: two humbuckers, a three-position selector with a custom middle setting, a 500 kΩ volume and tone and a 0.022 µF capacitor. The Majesty adds the active preamp, the boost and the piezo system. Every connection and what each switch position does
Viewed from the back of the controls, as you solder them.
Open the interactive diagram to zoom, move components and try the switches.
Inside the guitar
Pickups
- Bridge
- DiMarzio Dreamcatcher
Controls and switching
- Pickup selector
- Three-way toggle with a custom centre position
- Piezo selector
- Three-way toggle: magnetic, piezo or both
- Volume
- Push/push for a gain boost, through an active preamp
- Tone
- 500 kΩ passive, push/push for two more pickup settings
- Tone capacitor
- 0.022 µF
- Piezo
- Fishman Powerbridge saddles, mono or stereo output
What the maker does not publish
- Volume pot value
- What the custom centre position and the push/push tone connect
We leave those out instead of guessing. The drawing above shows workable values for the same circuit.
Sources
Every value on this page comes from the pages above. This is an independent reference by Tinkercaster, not endorsed by John Petrucci or Ernie Ball Music Man, DiMarzio. Names identify the instruments and parts only.