Skip to content
Tinkercaster

What Slash plays

Slash: Gibson Slash Les Paul Standard wiring

Two Custom Burstbucker Alnico 2 humbuckers, two volumes, two tones and a toggle, hand-wired with Orange Drop capacitors.

The closest drawing in our library. The same layout: two humbuckers, a three-way toggle, two volumes and two tones. The part values in the drawing are Bare Knuckle's, because Gibson does not publish its own. Every connection and what each switch position does

Viewed from the back of the controls, as you solder them.

Bare Knuckle two humbuckers, 3-way toggle, two volumes, two tonesSlash: Gibson Slash Les Paul Standard wiring. Two humbuckers · Toggle · Two volumes · Two tones. Original Tinkercaster drawing with labelled terminals.Neck humbucker (4-conductor)Bridge humbucker (4-conductor)550k550kGibson15nF550k550kTAD22nFredblackgreenwhitebareredblackgreenwhitebareT1T2T3T4lug1lug2lug3lug1lug2lug3ablug1lug2lug3lug1lug2lug3abtipsleevegroundNeck humbucker (4-conductor)Bridge humbucker (4-conductor)3-way toggle switchNeck volume 550kNeck tone 550kNeck tone 0.015uFBridge volume 550kBridge tone 550kBridge tone 0.022uFOutput jackBridge ground wire

Open the interactive diagram to zoom, move components and try the switches.

Inside the guitar

Pickups

Neck
Gibson Custom Burstbucker Alnico 2Humbucker
Bridge
Gibson Custom Burstbucker Alnico 2Humbucker

Controls and switching

Controls
Two volumes, two tones and a toggle switchGibson
Wiring
Hand-wired with Orange Drop capacitorsGibson

What the maker does not publish

  • Pot values
  • Capacitor value

We leave those out instead of guessing. The drawing above shows workable values for the same circuit.

Sources

Every value on this page comes from the pages above. This is an independent reference by Tinkercaster, not endorsed by Slash or Gibson. Names identify the instruments and parts only.

More players

All players →