TinkercasterParts and values
| In the drawing | Value | Part |
|---|---|---|
| Neck Pickup | — | Humbucker (four-conductor, Seymour Duncan colours)Generic |
| Bridge Pickup | — | Humbucker (four-conductor, Seymour Duncan colours)Generic |
| 3-Way Toggle | — | Switchcraft 3-Way ToggleExample part |
| Volume 500k | 500k | CTS 500k Audio PotExample part |
| Neck Tone 500k | 500k | CTS 500k Audio PotExample part |
| Output Jack | — | Switchcraft #11Example part |
| Bridge Tone 500k | 500k | CTS 500k Audio PotExample part |
| Bridge ground | — | Bridge ground wireGeneric |
| Neck .047 cap | 47nF | Orange Drop .047µFExample part |
| Bridge .047 cap | 47nF | Orange Drop .047µFExample part |
| Split switch ON/ON mini-toggle | — | DPDT Mini-ToggleExample part |
“Example part” means any part with the same value and lugs will do; the source does not name a brand. “Generic” stands in for an unspecified pickup: check your own pickup's lead colours before you solder.
Specific to this wiring
- Mini-toggle tags mapped by function from the catalog contact table where the source leaves them unlabelled.
- The engine steps the pickup selector; standalone mini-toggles share that position index (modifier contacts close when the index matches).
Understand this wiring
- Seymour Duncan humbucker wire colors
See the pickup, recognise its two halves, and learn where each coloured wire goes.
- Seymour Duncan coil splitting explained
A humbucker has two coils. See how a switch lets you use just one of them.
- Reading Seymour Duncan push/pull switch diagrams
Turning the knob and pulling it do different jobs. See the actual part, then try its switch connections.
Connections
In soldering order: grounds first, then the switch, the pickups and the signal path.
| # | From | To | How |
|---|---|---|---|
| 1 | w2 | w2 | Wiregreen |
| 2 | w3 | w3 | Wirebare |
| 3 | w7 | w7 | Wireblack |
| 4 | w9 | w9 | Wiregreen |
| 5 | w10 | w10 | Wirebare |
| 6 | w14 | w14 | Wireblack |
| 7 | w16 | w16 | Wireground |
| 8 | w18 | w18 | Wireblack |
| 9 | w19 | w19 | Wireblack |
| 10 | w20 | w20 | Wireblack |
| 11 | w21 | w21 | Wireblack |
| 12 | w22 | w22 | Wireblack |
| 13 | w35 | w35 | Wireblack |
| 14 | w5 | w5 | Wireblack |
| 15 | w12 | w12 | Wireblack |
| 16 | w15 | w15 | Wireblack |
| 17 | w30 | w30 | Wirewhite |
| 18 | w31 | w31 | Wirered |
| 19 | w32 | w32 | Wirewhite |
| 20 | w33 | w33 | Wirered |
| 21 | w34 | w34 | Wireblack |
| 22 | w4 | w4 | Wireblack |
| 23 | w11 | w11 | Wireblack |
| 24 | w6 | w6 | Wireblack |
| 25 | w13 | w13 | Wireblack |
| 26 | w17 | w17 | Wireblack |
What each position does
| Setting | The source | Engine result |
|---|---|---|
| Position 1 | Engine reading; mini-toggle(s) at rest (throw 1). | Neck Pickup (both coils). |
| Position 1 | Engine reading; mini-toggle throws {"p11":2}. | Neck Pickup (split to one coil). |
| Position 2 | Engine reading; mini-toggle(s) at rest (throw 1). | Neck Pickup (both coils) and Bridge Pickup (both coils) in parallel. |
| Position 2 | Engine reading; mini-toggle throws {"p11":2}. | Neck Pickup (split to one coil) and Bridge Pickup (split to one coil) in parallel. |
| Position 3 | Engine reading; mini-toggle(s) at rest (throw 1). | Bridge Pickup (both coils). |
| Position 3 | Engine reading; mini-toggle throws {"p11":2}. | Bridge Pickup (split to one coil). |
Checked with the Tinkercaster wiring engine against the switching the source describes.
- Mini-toggle lever states are not independently enumerated; they share the pickup-selector position index.
Before you solder
Ticks are kept in this browser only, as a reminder. They are not a check of your joints. New to soldering? Read the soldering cheat sheet.
Check before plugging in
Measure across the output jack with a multimeter on its resistance range. No exact readings are given where the source does not specify the pickups.