Skip to content
Tinkercaster

What Carlos Santana plays

Carlos Santana: PRS Santana Retro wiring

Two PRS Santana humbuckers on a three-way toggle, with one volume and one tone.

The closest drawing in our library. The same circuit: two humbuckers, a three-way toggle, one volume and one tone. The drawing was not made for PRS pickups, so lead colors follow the pickups you fit. Every connection and what each switch position does

Viewed from the back of the controls, as you solder them.

Two humbuckers, three-way toggle, one volume and one toneCarlos Santana: PRS Santana Retro wiring. Two humbuckers · Three-way toggle · One volume · One tone. Original Tinkercaster drawing with labelled terminals.Neck PickupBridge Pickup500k500k22nFredblackwhitegreenbareredblackwhitegreenbareT1T2T3T4lug1lug2lug3lug1lug2lug3tipsleeveabgroundNeck PickupBridge Pickup3-Way ToggleVolume 500kATone 500kAOutput Jack.022µfBridge ground

Open the interactive diagram to zoom, move components and try the switches.

Inside the guitar

Pickups

Neck
PRS Santana (bass)Humbucker
Bridge
PRS Santana (treble)Humbucker

Controls and switching

Controls
One volume and one tonePRS
Three-way toggle
Down: treble (bridge) pickup; middle: both; up: bass (neck) pickupPRS

What the maker does not publish

  • Pot values
  • Tone capacitor value

We leave those out instead of guessing. The drawing above shows workable values for the same circuit.

Sources

Every value on this page comes from the pages above. This is an independent reference by Tinkercaster, not endorsed by Carlos Santana or PRS. Names identify the instruments and parts only.

More players

All players →