Skip to content
Tinkercaster

What Mark Tremonti plays

Mark Tremonti: PRS Mark Tremonti wiring

Two PRS Tremonti humbuckers on a three-way toggle, each with its own volume and tone.

The closest drawing in our library. The same circuit: two humbuckers, a three-way toggle, two volumes and two tones. The drawing was not made for PRS pickups, so lead colors follow the pickups you fit. Every connection and what each switch position does

Viewed from the back of the controls, as you solder them.

Two humbuckers, toggle, two volumes and two tonesMark Tremonti: PRS Mark Tremonti wiring. Two humbuckers, toggle, two volumes and two tones. Original Tinkercaster drawing with labelled terminals.Neck PickupBridge Pickup500k500k500k500k22nF22nFredblackwhitegreenbareredblackwhitegreenbareT1T2T3T4lug1lug2lug3lug1lug2lug3lug1lug2lug3lug1lug2lug3tipsleevegroundababNeck PickupBridge Pickup3-Way ToggleNeck Volume 500kABridge Volume 500kANeck Tone 500kABridge Tone 500kAOutput JackBridge ground.022µf (neck).022µf (bridge)

Open the interactive diagram to zoom, move components and try the switches.

Inside the guitar

Pickups

Neck
PRS Tremonti (bass)Humbucker
Bridge
PRS Tremonti (treble)Humbucker

Controls and switching

Controls
A volume and a tone for each pickupPRS
Three-way toggle
Down: treble (bridge) pickup; middle: both; up: bass (neck) pickupPRS

What the maker does not publish

  • Pot values
  • Tone capacitor values

We leave those out instead of guessing. The drawing above shows workable values for the same circuit.

Sources

Every value on this page comes from the pages above. This is an independent reference by Tinkercaster, not endorsed by Mark Tremonti or PRS. Names identify the instruments and parts only.

More players

All players →